Tag Archives: pet machine

China manufacturer 6m3 40bar Oil Free Pet Blowing Air Compressor 40bar High Pressure Air Compressor for Pet Blowing Filling Machine with Good quality

Product Description

Diaphragm Compressor 100% purity no leakage Oil-free Oxygen Booster Compressor

The diaphragm compressor booster is a special structure of the volume-type compressor with high compression ratio, good leak tightness, compressed gas without lubricating oil and other solid impurities contaminated features, So it’s suitable for high purity compression, rare, valuable, inflammable, explosive, toxic, harmful, corrosive, and high pressure gas

Advantages of Diaphragm compressor:
1. Oil-free compression due to the hermetic separation between gas and oil chamber.
2.  Abrasion-free compression due to static seals in the gas stream
3.  Automatic shutdown in case of a diaphragm failure prevents damage
4.  High Compression Ratios-Discharge pressure up to 1000bar.
5.  Contamination Free Compression
6. Corrosion Resistance
7.  High Reliability

As a displacement compressor with special,diaphragm compressor is characterized by large compression ratio,good sealing performace,and that the compress air will not be polluted by lubricant or other solid impurities.Therefore diaphragm compressor is applicable to compress high-purity,rare and precious,flammable and explosive,toxic and hazardous,corrosive and high pressure gases.
Keepwin diaphragm compressors consist of 4 types that are Z,V,L and D type.The exhaust pressure ranges from 1.3 to 100 Mpa. The products are widely used in the industries of national defense,scientific research, petrochemical, nuclear power, parmaceutical, food-stuff and gas separation.

Inquiry to us!

Note:for the other customizing process gas compressor, please kindly send below information to our factory to calculate the producing cost for your item.
Clients’ inquiries should contain related parameters
A. The gas compression medium
B. Gas composition? or the gas purity?
C. The flow rate: _____Nm3/hr
D. Inlet pressure: _____ Bar (gauge pressure or absolute pressure)
E. Discharge pressure: _____ Bar (gauge pressure or absolute pressure)
F. Inlet temperature
G.Discharge temperature
H. Cooling water temperature as well as other technical requirement.

Technical Paramter of Oil Free Diaphragm Compressor

GZ type Diaphragm Compressor Technical Parameters
No.	Model	F.A.D (Nm3/min)	Inlet Pressure ( Mpa)	Exhuast Pressure (Mpa)	Power (KW)	Speed r/min	Dimension (L×W×H)mm	N.W Weight (t)	Voltage V
1	G2V-10/8-160	10	0.8	16	5.5	400	15509001050	0.8	380
2	G2V-5/3.5~150	5	0.35	15	5.5	400	15509001050	0.8	380
3	G2V-10/4~320	10	0.4	32	5.5	430	16508501250	0.8	380
4	G3V-240/5~12	240	0.5	1.2	18.5	400	186012001585	2	380
5	G3V-1200/75~83	1200	7.5	8.3	18.5	400	178010501750	1.8	380
6	G3V-80/13~150	80	1~1.5	15	22	330	240013501465	2.1	380
7	G3V-30/5~315	30	0.5	31.5	15	400	25719551455	1.8	380
8	G3V-80/7~150	80	0.7	15	22	400	230213851444	2.5	380
9	G2V-25/6~150	25	0.6	15	7.5	400	15007751075	0.8	380
10	G2.5V-10/160	10	Normal	16	7.5	400	165015711400	0.95	380
11	G2.5V-20/1~160	20	0.1	16	11	400	165015711400	0.95	380
12	G2.5V-16/2.5~160	16	0.25	16	7.5	400	165015711400	0.95	380
13	G3V-100/24~125	100	2.4	12.5	22	400	216012501500	1.8	380
14	G4V-220/99-349	220	7.0~25	34.9	37	400	249218401610	3.2	380
15	G2Z-45/150~350	45	10~20	35	7.5	400	16107901380	0.55	380
16	G2Z-5/30~400	5	3	40	5.5	400	15607901470	0.55	380
17	G2.5Z-30/32~170	30	3.2	17	7.5	400	15506501530	0.7	380
18	G3Z-600/75~83	600	7.5	8.3	11	400	178010501750	1.3	380
19	G3Z-85/100~350	85	5~25	35	18.5	400	190012401760	1.6	380
20	G3Z-150/150~350	150	15	35	18.5	400	178010501750	1.8	380
21	G2.5Z-40/7~30	40	0.7	3	7.5	400	165313721470	0.9	380
22	G2.5Z-100/20~35	100	2	3.5	5.5	400	13307501530	0.9	380
23	GV3-110/8~150	110	0.8	15	30	400	237014581630	3	380
24	G3V-150/3.5~30	150	0.35~0.55	3	30	400	254318352036	3.21	380
25	G3V-60/0.38~9.3	60	0.038	0.93	15	400	203015201750	72	380

GZ type single stage 1 metal diaphragm thickness: 0.3~0.5mm

Low rotation speed only: 300~500rpm/min, flow rate up to 100m3/h

Suitable forconveying and pressurizing various gases.

Can be used as a booster compressor after an oil-free compressor (such as oil free screw compressor, oil free scroll compressor, oil free piston compressor, etc).

^{Pressure ratio of each stage can be as high as 25, 100% Oil-Free, No Leakage}

Main technical data

Cylinder
All the cylinders comprise upper plate, diaphragms, and cylinder body etc. The diaphragms are clamped between the cylinder cover and cylinder body. The cylinder cover and cylinder body each has a concave recess hollowed out in their contacting faces. The gas cylinder is formed between cylinder cover concave recess and diaphragms. Both suction valve and discharge valve are fitted on the upper plate. Among of them, the discharge valve is located on the center of the upper plate. The evenly located small oil holes are on the cylinder body to deliver the oil pressure inside the oil cylinder to the bottom of diaphragms (each diaphragm compressor’s cylinder has 3 piece diaphragm.)

Pressure Regulating Valve
The oil pressure of oil cylinder is regulated by the tension of the valve spring.In case the oil pressure is higher than the regulated value, turn the regulating bolt counter-clockwise to loosen the spring tension, but turn the regulating bolt clockwise to tighten the spring, when the oil pressure is lower than the regulated value. When the oil pressure meets the required value, the regulating bolt must be locked with a lock-nut. The oil pressure of the oil cylinder shall always be higher than the discharge pressure by 15~20%. But the oil and gas differential pressure shall not be lower than 0.3MPa or higher than 1.5MPa.

Cooler
The cooler structure is the double-wall pipe type. The circular space between the outer and inner pipe is the cooling water passage and the inner pipe is the gas passage. Normally the water inlet port is at the lower side and the water outlet port is at the upper side. The flow direction of cooling water and gas is on the contrary.

Oil Pressure Measuring Device
The measuring device of oil cylinder discharge pressure consists of shock-proof pressure gauge, check valve and unloading valve. The case of the pressure gauge is totally airproof and filled with damping liquid. The inner devices of gauge is immersed in the liquid, which makes the pressure gauge hands stable through the function of the viscosity of damping liquid. The unloading valve is fitted under the gauge to discharge the remained air in the oil pipeline and to unload the oil pressure gauge. Also the check valve connecting with oil cylinder through pipeline is fitted under the unloading valve.

Oil pipes
Oil pipes consist of lube oil pipe and oil pressure secure system.
The lubrication for the driving device adopts gear oil pump circulation pressure lubricating. The lube oil stored in the frame oil tank enters into the gear oil pump after being filtered and is pressed into the oil holes in the crankshaft through the gear oil pump to lubricate the crankshaft friction surface. At the same time, part of the lube oil reaches the crosshead pin and crosshead along the oil holes in the connecting rod to lubricate the friction surface. The oil pressure of gear oil pump shall be kept between 0.3~0.5Mpa, and the bearings at the 2 ends of crankshaft is splash lubricated.
Oil pressure secure system consists of oil compensating pipe, pressure-measuring pipe and oil return pipe. The oil output from the oil compensating pump will supplement oil for compressor cylinders through the oil compensating pipe and the excess oil returns to the crankcase through the pressure-regulating valve.

FAQ
Q1: What’s your delivery time?
A: Generally 5-10 days if the goods are in stock. Or it is 20-35 days if the goods are not in stock, it is according to quantity.

Q2: How long is your air compressor warranty?
A: Usually 1 year /12 Months for whole compressor machine, 2years/24months for air end (except maintenance spare parts.). And we can provide further warranty if necessary.

Q3: How long could your air compressor be used?
A: Generally, more than 10 years.

Q4: Can you do OEM for us?
A: Yes, of course. We have around 2 decades OEM experience.And also we can do ODM for you.

Q5: What’s payment term?
A: T/T, L/C, D/P, Western Union, Paypal, Credit Card, Trade Assurance and etc. Also we could accept USD, RMB, GBP, Euro and other currency.

Q6: How about your customer service?
A: 24 hours on-line service available. 48hours problem sovled promise.

Q7: How about your after-sales service?
A: 1. Provide customers with intallation and commissioning online instructions.
2. Well-trained engineers available to overseas after-sales service.

Q8. Are you factory?
A4: Absolutely! You have touched the primary sources of Air /Gas Compressor. We are factory.

How to contact with us?
Send your Inquiry Details in the Below, or Click “Send inquiry to supplier” to check more other Gas Compressor machine equipment!

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.
air-compressor

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are 2 different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only 1 cylinder, which means 1 stroke is required to move air from 1 cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the 1 with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have 1 air intake, and two-stage air compressors have 2 air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China manufacturer 6m3 40bar Oil Free Pet Blowing Air Compressor 40bar High Pressure Air Compressor for Pet Blowing Filling Machine with Good quality

China Standard High Pressure Screw Compressor For PET Bottle Blowing Machine wholesaler

Product Description

Industrial Low-Noise Electric Stationary AC Power Oil Lubricated Medium High Pressure Direct Driven Rotary Screw Type Air Compressor Advantages

1.Superior design with 72 types of technology patent, 2 stages compression, realize maximum energy saving and lowest noise level.

2.State-of-the-art screw element, original Germany CZPT air end, ladvanced SAP profile design, superior Sweden CZPT element bearings

3.Adopts world-renowned components, such as Schneider electronics from France, DENAIR filters from Germany, CZPT pressure sensor from Denmark, etc. contribute to guarantee the compressor longer service life.

4.Intelligent controller and multi-language LCD keep the outstanding safety
performance.

5.Stainless steel oil pipe and air pipe, high temperature resistant (400ºC=752ºF) and low temperature resistant(-270ºC=518ºF), high pressure resistant.lUltra-long life(80 years), completely leak free and maintenance free

6.Conform to CE, ISO9001 and energy saving certification, etc.

The Technical Parameters Of High Pressure Rotary Screw Air Compressor

Model	Maxinmum working pressure		Capacity(FAD)*								Installed motor		Driving mode& Cooling method	Noise level**	Dimensions(mm)			Weight	Air outlet pipe diameter
			50 HZ				60 HZ				power
			Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.
	bar(g)	psig	m³/min		cfm		m³/min		cfm		kw	hp		dB(A)	L	W	H	kg
DVAH-90-16	16	232	3.73	9.24	131	326	4.28	8.57	151	303	90	120	Direct Driven Air Cooling /W-Water Cooling	78	2800	1600	1700	2500	DN50
DVAH-90-18	18	261	4.29	10.73	151	379	5.39	10.78	190	381	90	120		78	2800	1600	1700	2500	DN50
DVAH-90-20	20	290	4.24	10.61	150	375	5.33	10.67	188	377	90	120		78	2800	1600	1700	2500	DN50
DVAH-90-25	25	363	4.14	10.35	146	365	4.76	9.51	168	336	90	120		78	2800	1600	1700	2500	DN50
DVAH-110-16	16	232	5.32	13.3	188	470	5.81	11.62	205	410	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-18	18	261	5.78	14.45	204	510	5.58	11.16	197	394	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-20	20	290	5.73	14.33	202	506	5.38	10.76	190	380	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-25	25	363	4.86	12.15	172	429	5.28	10.56	186	373	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-30	30	435	4.95	12.38	175	437	5.15	10.3	182	364	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-35	35	508	4.24	10.6	150	374	5.1	10.2	180	360	110	150		78	2800	1600	1700	3200	DN50
DVAH-110-40	40	580	4.21	10.53	149	372	5.6	11.2	198	395	110	150		78	2800	1600	1700	3200	DN50
DVAH-132-16	16	232	5.35	13.37	189	472	7.25	14.5	256	512	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-18	18	261	5.81	14.53	205	513	6.5	12.99	229	459	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-20	20	290	5.75	14.37	203	507	6.42	12.84	227	453	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-25	25	363	4.87	12.18	172	430	6.23	12.46	220	440	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-30	30	435	4.97	12.43	176	439	5.25	10.5	185	371	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-35	35	508	4.26	10.64	150	376	5.2	10.4	184	367	132	175		78	2800	1600	1700	3950	DN50
DVAH-132-40	40	580	4.22	10.56	149	373	5.15	10.3	182	364	132	175		78	2800	1600	1700	3950	DN50
DVAH-160-16	16	232	6.17	15.43	218	545	9.39	18.78	332	663	160	215		80	2800	1600	2000	5000	DN65
DVAH-160-18	18	261	6.76	16.91	239	597	9.22	18.43	325	651	160	215		80	2800	1600	2000	5000	DN65
DVAH-160-20	20	290	6.66	16.65	235	588	8.07	16.13	285	570	160	215		80	2800	1600	2000	5000	DN65
DVAH-160-25	25	363	5.89	14.73	208	520	7.99	15.97	282	564	160	215		80	2800	1600	2000	5000	DN65
DVAH-185-16	16	232	6.55	16.37	231	578	10.3	20.6	364	727	185	250		80	2800	1600	2000	5500	DN65
DVAH-185-18	18	261	7.29	18.21	321	643	10.19	20.37	360	719	185	250		80	2800	1600	2000	5500	DN65
DVAH-185-20	20	290	7.2	18.01	254	636	8.81	17.62	311	622	185	250		80	2800	1600	2000	5500	DN65
DVAH-185-25	25	363	7.06	17.65	249	623	8.73	17.45	308	616	185	250		80	2800	1600	2000	5500	DN65
DVAH-200-16	16	232	8.68	21.71	307	766	11.94	23.88	422	843	200	270		85	3300	2000	2100	6000	DN80
DVAH-200-18	18	261	10.64	26.61	376	940	11.32	22.64	400	799	200	270		85	3300	2000	2100	6000	DN80
DVAH-200-20	20	290	9.7	24.25	343	856	10.69	21.37	377	755	200	270		85	3300	2000	2100	6000	DN80
DVAH-200-25	25	363	8.84	22.09	312	780	9.1	18.19	321	642	200	270		85	3300	2000	2100	6000	DN80
DVAH-220-16	16	232	9.75	24.37	344	860	12.17	24.34	430	859	220	300		85	3300	2000	2100	6300	DN80
DVAH-220-18	18	261	12.13	30.32	428	1070	11.84	23.67	418	836	220	300		85	3300	2000	2100	6300	DN80
DVAH-220-20	20	290	10.56	26.39	373	932	11.21	22.42	396	792	220	300		85	3300	2000	2100	6300	DN80
DVAH-220-25	25	363	9.6	24.01	339	848	10.47	20.94	370	739	220	300		85	3300	2000	2100	6300	DN80
DVAH-250-16	16	232	10.7	26.75	378	944	14.07	28.13	497	993	250	350		85	3500	2200	2100	6500	DN125
DVAH-250-18	18	261	12.13	30.32	428	1070	14	27.99	494	988	250	350		85	3500	2200	2100	6500	DN125
DVAH-250-20	20	290	12.07	30.16	426	1065	12.95	25.89	457	914	250	350		85	3500	2200	2100	6500	DN125
DVAH-250-25	25	363	10.45	26.13	369	923	12.45	24.9	440	879	250	350		85	3500	2200	2100	6500	DN125
DVAH-280-16	16	232	12.55	31.38	443	1108	16.51	33.02	583	1166	280	375		85	3500	2200	2100	7000	DN125
DVAH-280-18	18	261	14.99	37.47	529	1323	14.84	29.68	524	1048	280	375		85	3500	2200	2100	7000	DN125
DVAH-280-20	20	290	14.84	37.09	524	1310	14.69	29.38	519	1037	280	375		85	3500	2200	2100	7000	DN125
DVAH-280-25	25	363	12.37	30.93	437	1092	12.69	25.38	448	896	280	375		85	3500	2200	2100	7000	DN125
) FAD in accordance with ISO 1217 : 2009, Annex C: Absolute intake pressure 1 bar (a), cooling and air intake temperature 20 °C ) Noise level as per ISO 2151 and the basic standard ISO 9614-2, operation at maximum operating pressure and maximum speed; tolerance: ± 3 dB(A) **) Specifications are subject to change without prior notice

DENAIR Factory

DENAIR Certificates

DENAIR Exhibiton

DENAIR Customers

We Carefully Selected For You The Classic Case:

DENAIR VSD Screw Air Compressor for Food Processing in USA
Project Name: Coffee manufacturer in Omaha, United States
Product Name: 30KW 40HP direct dirven variable frequency screw air compressor with air dryer and air receiver tank
Model No. & Qty: DVA-30G x 2
Working Time: From January, 2016 till now
Event: In January, 2016, CZPT service team Michael, Sissi and Steven visited our VIP customer in Omaha, United States for technical training for air compressor maintenance. The customer was very satisfied with our good service and VSD energy saving solution.

FAQ

Q1: Are you factory or trade company?
A1: We are factory.

Q2: What the exactly address of your factory?
A2: No. 366, YangzhuangBang Street, Pingxing Rd., Xindai Town, HangZhou, ZHangZhoug Province, China

Q3: Warranty terms of your machine?
A3: Two years warranty for the machine and technical support according to your needs.

Q4: Will you provide some spare parts of the machines?
A4: Yes, of course.

Q5: How long will you take to arrange production?
A5: 380V 50HZ we can delivery the goods within 10 days. Other electricity or other color we will delivery within 22 days

Q6: Can you accept OEM orders?
A6: Yes, with professional design team, OEM orders are highly welcome.

Choose an Air Compressor for Your Business

Positive displacement

Single-stage

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The 2 water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers 2 models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and 2 universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Standard High Pressure Screw Compressor For PET Bottle Blowing Machine wholesaler

China manufacturer 50HP 37kw 4.6 – 6.6 M3/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me manufacturer

Product Description

Inner photos of CZPT 50HP 37kw 4.6 – 6.6 m3/min Direct Driven Screw Air Compressor for PET Bottle Blowing Machine

Advantages
1. New generation of high-efficient air end
2. Permanent magnetic motor
3. SKF bearing
4. Energy-saving air inlet control system
5. High performance frequency converter
6. Highly efficient cooling system
7. Highly efficient preofessional filtering system

Brief Introduction:
Air end: Germany Technology. 30 years designed lifetime.
Motor: 100% rare earth permanent magnet motor.
Inverter: Chinese No. 1 inverter can save 30% energy.
Warranty: 5 years for the air end, and 2 years for the whole compressor.
Delivery time: 7-10 days.
After-sales service:we have our professional after-sales technician to instruct the installation of the whole screw air compressor.
Motor Power: 37kw 50hp.
Working Pressure: 7 – 16bar (100 – 232psi)
Air Delivery: 4.6-6.6m³/min
Type of Driving: Direct Driven
Type of Cooling: Air Cooling/Water Cooling
Noise: 68dB
Size: 1540*950*1290mm
Weight: 880kg

Model	Air Flow (m³/min)				Motor Power	Noise	Outlet Diameter	Dimension	Weight
Model	7bar	8bar	10bar	13bar	kw	dB	inch	*WDH (mm)*	kg
YD-7.5A	1.0	0.8	0.5	0.4	5.5	65	G3/4”	780680800	300
YD-10A	1.1	1.0	0.85	0.7	7.5	65	G3/4”	780680800	320
YD-15A	1.8	1.65	1.5	1.3	11	65	G3/4”	1100800980	400
YD-20A	2.4	2.2	2.1	1.8	15	68	G3/4”	1100800980	430
YD-25A	3.1	3.0	2.7	2.3	18.5	68	G1”	12508701180	590
YD-30A	3.8	3.6	3.2	2.5	22	68	G1”	12508701180	650
YD-40A	5.3	5.0	4.3	3.6	30	69	G1”	12508701180	750
YD-50A	6.6	6.2	5.7	4.6	37	69	G11/2”	15409501290	880
YD-60A	8.0	7.7	6.9	6.0	45	70	G11/2”	15409501290	1000
YD-75A/W	10.5	9.8	8.7	7.3	55	70	G2”	160011501420	1500
YD-100A/W	13.6	13.0	11.3	10.1	75	72	G2”	257112601460	1900
YD-125A/W	16.2	15.4	13.2	11.2	90	72	DN50	257112601460	2500
YD-150A/W	20.8	19.5	16.5	13.7	110	73	DN65	230016001790	2800
YD-175A/W	24.0	23.0	20.0	15.5	132	74	DN65	230016001790	3000
YD-220A/W	27.8	26.0	23.5	19.5	160	75	DN80	250017001850	3500
YD-250A/W	32.5	31.0	26.0	21.6	185	76	DN80	250017001850	3800
YD-270A/W	34.5	33.0	28.0	23.5	200	77	DN80	250017001850	4200
YD-300A/W	38.0	36.5	32.0	27.0	220	78	DN100	280019001950	4800
YD-350A/W	43.0	40.5	36.5	32.0	250	80	DN100	280019001950	5200
YD-500A/W	76.0	75.3	65.4	59.0	400	83	DN125	420022002240	8200
Remarks:
1. “A” represents air cooling, and “W” represents water cooling;
2. working ambinent temperature: -5ºC-45ºC;
3. exhausting air temperature ≤ working ambinent temperature +10ºC-15ºC;
4. starting mode: Y-△;
5. exhausting oil content: <3ppm;
6. certificate: CE/ISO9001/ASME;
7. voltage: 380V/220V/400V/440V/415V

Detail display of of CZPT 50HP 37kw 4.6 – 6.6 m3/min Direct Driven Screw Air Compressor
for PET Bottle Blowing Machine

Advantages of CZPT 50HP 37kw 4.6 – 6.6 m3/min Direct Driven Screw Air Compressor for PET Bottle Blowing Machine
Significant energy saving effect
Permanent magnet synchronous variable air compressor is always running in the loaded state, no uninstall run phenomenon, and this no power wastage. Permanent magnet synchronous motor efficiency is very high compared with ordinary motor efficiency by at least 2%, with less power consumption and greater output torque, energy-saving effect is remarkable, fee energy consumption remained at the level of the most economical.

Introduction of permanent magnet synchronizing variable frequency compressor
The permanent magnet synchronizing variable frequency compressor is a most recent compressor with excellent quality and high efficiency and energy saving at present. It is an advanced technique owned by only a few advanced countries and zones in the world. It is a high-end tendency for the future compressor development. The design concept and technical measure has broken through the tradition technical concept. It integrates the most sophisticated and energy saving technical factors.

Excellent quality of motors
The permanent magnet synchronizing variable frequency compressor is equipped with high efficiency permanent magnet synchronizing motor (PM motor). Compared to normal motors, PM motor has smaller volume and more excellent energy saving. It will exert incomparable energy saving effect than normal inductive motor when installed with the special frequency converters. It uses high performance NdFeB magnets which will not loss magnet even at 120ºC and service life can be up to 15 years. The stater winding can be of special corona resistant wire for frequency converters with excellent insulation performance. As the magneto conductivity of rotors is very high, the diameter is very small and CZPT to be installed at the extending shaft of the male rotor, without use of bearing, thus eliminating the faults of motor bearing and improving the driving efficiency.

Strong support of frequency converter to compressor
The permanent magnet synchronizing variable frequency compressor is equipped with special frequency converter with wider frequency converting rang. With the rapid development of techniques, the variable frequency compressor has become a high-grade machine in the energy saving area. It can realize maximum energy saving effect with the permanent magnet synchronizing motor.

Our Certificate:
1. ISO9001;
2. SGS;
3. CE;
4. 12 patents for screw compressor.

F.A.Q

Q1. Why do customers choose us?
Yunshun Electric Machinery Co., Ltd. is a company specializing in screw air compressor for 18 years since 2001. Our German Standard production line helps us get the affirmation from our agents as well as end-user clients.

Q2. Are you a manufacturer or trading company?
We are a professional manufacturer with big modern factory in HangZhou,China.
Both OEM & ODM service can be accepted.

Q3. What’s your delivery time?
Generally 7-10 days, if urgent order, we can arrange, too.

Q4. How long is your air compressor warranty?
2 year for the whole machine and 5years for screw air end, except consumable spare parts.

Q5. How long could your air compressor be used for?
At least 10 years.

Q6. What’s payment term?
T/T, L/C, Western Union, Credit Card, and etc.

Q7. How about your customer service?
24 hours on-line service for all our clients.

Q8. How about your after-sales service?
1. Providing customers with installation online instructions.
2. Well-trained engineers available to overseas service.
3. PlHangZhou for oversea after-sales supporting company.

what to see in an air compressor

If you need to buy an air compressor, you should know what to look for. The types of air compressors on the market are classified according to their CFM rating, safety devices, and pumps. There are several differences between lubricated and oil-free air compressors that you should know before buying. To better understand the difference between these types of air compressors, read on. This article will guide you through these differences.

Pump

If you are looking for a quality air compressor, you have come to the right place. A good air compressor pump will provide high pressure for anything from tires to boats and more. There are hundreds of different models to choose from, and the great thing about buying 1 from a Chinese manufacturer is that they have so many options. More importantly, Chinese manufacturers can customize air equipment such as air compressors at low prices.
A good quality air pump won’t break easily, but you’ll be able to use it for years. Choosing a high-quality pump will help you avoid many hassles on the road, such as unplanned downtime and installation costs. Plus, a pump from the same manufacturer as your air compressor is your best bet to ensure optimum performance. Listed below are some tips for finding a quality pump for your air compressor.
The air compressor is an important but unremarkable invention. Without them, our lives would be completely different. Without a pump, we can’t get hot water from central heating, nor can we get heat from the refrigerator. We can’t inflate bicycle tires, and we can’t refuel cars. Pumps are vital to all kinds of machines. So why is it important to choose the right product? The answer may surprise you.
Different types of pumps are used for different applications. Positive displacement pumps move a fixed volume of fluid and direct it to a drain. This design ensures constant flow at a constant speed regardless of discharge pressure. Centrifugal pumps work differently. The impeller accelerates the fluid, converting the input energy into kinetic energy. This type of pump is most commonly used in mines, air conditioning, industrial plants, and flood control.
air-compressor

safety equipment

There are several safety features you should check when using an air compressor. First, check the connection of the air filter to the air. If they come loose, parts may separate and cause injury. Another important safety feature is the shut-off valve. When working near compressed air, the shut-off valve should be within easy reach and visibility. Moving parts and other equipment must be protected with protective covers. Check safety valve and replace damaged parts.
Rupture discs are copper discs located on the air cooler. When the air pressure exceeds a certain limit, it bursts. Fusible plugs contain materials that melt at high temperatures. The compressor should have a lubricating oil pressure alarm and cut off the trip signal. If these 2 safety devices fail, the compressor should be stopped immediately. The rupture disc should be inspected at least weekly to ensure it does not rupture under pressure.
If the pressure level is too high, and overcurrent protection device cuts power to the motor. It also automatically shuts off the compressor when the hose ruptures or the air volume exceeds a preset level. The device should be installed on the air compressor to prevent accidents. Its job is to protect the operator from harm. If employees do not follow these safety measures, they may cause equipment damage.
To ensure safety when operating the air compressor, safety glasses and gloves should be worn. Pressurized air can cause eye injury, and crash goggles can provide a barrier to prevent this. Additionally, the self-retracting cord prevents trip hazards and reinforces excess cord. You should also keep your hands and body away from the air nozzle. This will prevent you from being sprayed with compressed air.

CFM Rating

An air compressor’s PSI and CFM ratings indicate the pressure and volume it can deliver. PSI stands for pounds per square inch and measures the force and pressure contained in 1 square inch of air. These 2 indicators are equally important when choosing an air compressor. If you need a lot of compressed air for a specific application, you will need a higher psi compressor. Likewise, if you are using compressed air in a smaller application, a low cfm compressor will not provide enough power to meet your needs.
When comparing different air compressors, be sure to pay close attention to horsepower and CFM ratings. While compressor power is essential for some tasks, it is not the most important aspect. The CFM rating of an air compressor will determine how big a project it can handle and how long it takes to charge. Make sure you understand the CFM and PSI ratings of your future compressors, as not knowing these important statistics can frustrate you and drive up costs.
In general, it is best to choose an air compressor with a CFM rating higher than the size of the air tool. This will ensure that the air compressor has enough pressure to work multiple tools efficiently at the same time. While smaller CFM ratings may be sufficient for smaller projects, larger tools such as drills require a lot of air. Therefore, the higher the CFM, the larger and more powerful the tool.
Once you understand the CFM of an air compressor, you can start looking for the right tool. You can check the CFM rating of your air compressor online by commenting below. If you’re not sure about the size of your air tool, you can always buy a second air compressor. This is a great way to double the CFM of your air compressor! You’ll have more air to do more work, and your compressor will last longer.
air-compressor

Lack of oil and lubrication

Oil-free air compressors have a smaller footprint and require less maintenance than oil-lubricated air compressors. Although oil-lubricated air compressors are more expensive and heavier than oil-free air compressors, they are also ideal for stationary use. The benefits of oil-free air compressors include greater durability and lower maintenance costs. The advantages and disadvantages of each type are discussed below.
Oil-free air compressors are generally quieter than oil-lubricated air compressors. However, you may still experience some noise while using it. To avoid this, you should choose a quiet intake compressor. However, if you work next to a noisy compressor, you should buy a muffler, an aftermarket filter that reduces compressor noise.
If you want to use the air compressor for a long time, the oil-free model is not the right choice. Its Teflon coating wears off over time, especially at extreme temperatures. Additionally, oil-free air compressors have a large number of moving parts that require regular maintenance, while oil-filled air compressors are great for those who don’t want to invest in extra parts.
Another major difference between oil-free and oil-lubricated air compressors is lubrication. Oil-lubricated air compressors require regular lubrication whereas oil-free air compressors are pre-lubricated. They have fewer parts and are cheaper. Oil-free air compressors are lighter than oil-lubricated air compressors. In addition to being more affordable, oil-free air compressors are more powerful and durable.
While oil-filled air compressors are more efficient and durable, they generate a lot of heat. However, they are also more expensive and require regular oil changes. Furthermore, they are difficult to transport. They also need to be permanently installed. These air compressors are also not portable and require a fixed location. So, consider your needs before deciding which type is best for you. When you’re choosing an air compressor for your business, be sure to shop around.
air-compressor

noise level

If you are wondering what the noise level of an air compressor is, the answer depends on your specific equipment and working environment conditions. Typically, air compressors produce 40 to 90 decibels of noise. Although the lower the decibel level, the quieter the compressor will be. Larger, more powerful air compressors produce higher noise levels than their little brothers. But no matter how big the air compressors are, it’s a good idea to wear hearing protection while working around them.
When purchasing a new air compressor, the noise level of the air compressor should be considered. While this may seem like a small problem, there are actually a lot of variations on these noisy machines. The most common type of air compressor is the reciprocating piston pump. This model uses pistons similar to an engine to rotate inside a chamber. The piston moves quickly and traps air proportional to its size. Single-piston air compressors are generally noisier than twin-piston models, also known as twin cylinders.
But even if you have the proper equipment to protect your hearing, it’s still important to know the noise level of an air compressor. Even if the noise is not immediately dangerous, it can still cause temporary or permanent hearing loss. This condition is called noise-induced hearing loss, and an air compressor with a sound level of 80 or higher can cause permanent hearing damage. You can avoid potential damage to your hearing and prevent accidents by simply paying attention to the noise level of your air compressor.
Air compressors are inherently noisy, but if you take steps to reduce their noise levels, you can minimize disruption to neighbors and co-workers. For example, installing a sound enclosure in your work area can prevent your air compressor from making as much noise as before. Depending on your workspace, you can also try installing a long air hose, which will reduce sound levels by up to 25%.
China manufacturer 50HP 37kw 4.6 - 6.6 M3/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me manufacturer

China supplier 40bar High Pressure Air Compressor for Pet Bottle Blowing Machine with Best Sales

Product Description

TECHNICAL DATA

Model	Type	FADNm3/min	PressureMPa	Power KW	Size L×W×H mm	Weight KG	Notes
DL-1.6/30	4cylinder,3stage	1.6	3.0	18.5	1700×850×1050	550	Horizontal
DL-2.0/30	4cylinder,3stage	2.0		22	2000×950×1200	700	Horizontal
2-DL-3.2/30	4cylinder,3stage	3.2		18.5×2	2030×950×1600	1200	Double vertical
2-DL-4.0/30	4cylinder,3stage	4.0		22×2	2500×1000×1700	1700	Double vertical
3-DL-4.8/30	4cylinder,3stage	4.8		18.5×3	3100×950×1600	1800	Three Vertical
3-DL-6.0/30	4cylinder,3stage	6.0		22×3	3800×1000×1700	2800	Three Vertical
DL-1.3/40	4cylinder,3stage	1.3	4.0	15	1500×800×950	500	Horizontal
DL-1.6/40	4cylinder,3stage	1.6		18.5	1700×850×1050	550
DL-2.0/40	4cylinder,3stage	2.0		22	2000×950×1200	700
2-DL-3.2/40	4cylinder,3stage	3.2		18.5×2	2030×950×1600	1200	Double Vertical
2-DL-4.0/40	4cylinder,3stage	4.0		22×2	2500×1000×1700	1700	Double Vertical
3-DL-4.8/40	4cylinder,3stage	4.8		18.5×3	3100×950×1600	1800
3-DL-6.0/40	4cylinder,3stage	6.0		22×3	3800×1000×1700	2800

Notes:
1,Performance parameters measured according to ISO2017,reference conditions:inlet temperature 20ºC,inlet pressure 1barA
2,Our company reserves the right to continuing improve the technology,parameter change without prior informed
3,Special models could be customized.

Product Description

Product Description:

24 hours non-stop overload design
S type 4 cylinder 3 stage
Crankshaft adopt 2 bearings,have the effect of heavy load capacity,steady,energy saving and low noise
Original Sandvik 7C27M02 valve plate,have the longer using time.
Original Imported piston ring,have the effect of less oil consumption and longer using time.
Patented crankshaft case breathing system,ensuring the breathing cap do not have oil discharging
New machine design,less vibration and more stable
More choice,Single or muti machine linkage

FACTORY

After Sales Service

• Warranty: One year for the whole machine 2 year for air end , and spare parts will be provided with best price.
• Over board engineer service is available for most countries.

Special Customized Service
• Quantity: MOQ 5 pcs Logo customized.

FAQ

Q1. What’s your delivery time?
Generally 7-10 days
Q2. How long is your air compressor warranty?
One year for the whole machine 2 year for air end .
Q3. How long could your air compressor be used for?
At least 10 years.
Q4. What’s payment term?
T/T, L/C and etc.
Q5. How about your customer service?
24 hours on-line service for all our clients.
Q6. How about your after-sales service?
1. Providing customers with installation online instructions.
2. Well-trained engineers available to overseas service.

Types of Air Compressors

There are many types of Air Compressors available on the market. Learn which 1 is right for your needs and what makes 1 better than another. Find out more about Single-stage models, Oil-free models, and Low-noise models. This article will explain these types and help you decide which 1 you need. You can also learn about Air Compressors that have single-stage compressors. If you are looking for a high-quality compressor, this article will help you choose a unit.
air-compressor

Air Compressors

Air compressors work by forcing atmospheric air through an inlet valve. As the piston moves down, it pulls atmospheric air into the chamber. As the piston rises, it forces the compressed air out of the cylinder through an exhaust valve. One of the most common types of air compressor is the reciprocating type. Another type of compressor is a single-stage piston. These types of compressors compress air in 1 stroke – equivalent to the complete rotation of the piston’s crankshaft.
These devices change electrical or mechanical energy into pressurized air. When air is compressed, its volume decreases, increasing its pressure. Air compressors typically have a minimum pressure of 30 bars. The lower pressure band is the range of air pressure. Most compressors are controlled separately, but network controls can be used to interconnect multiple compressors. This type of controller will not work for all types of compressors. There are other types of air compressors that can communicate with each other.
Compressed air has multiple applications in all kinds of industries. In agriculture, it can power pneumatically powered material handling machines for irrigation and crop spraying. Dairy equipments also use compressed air. Compressors are also used in the pharmaceutical industry for mixing tanks, packaging, and conveyor systems. Portable air compressors, which can be powered by diesel fuel, are frequently used at remote drilling sites. Portable air compressors are also commonly used in oil and gas. They can be used to remotely control valves and install reactor rods.
Whether you use an air compressor for agricultural purposes or in a manufacturing setting, there are some features to consider when choosing an air compressor for your needs. A good compressor will have a safety device. It will automatically shut off the input air and output air once sufficient compressing has been achieved. These features will help your air compressor remain efficient and protect your equipment. The safety device is an important feature of any air compressor to increase its overall efficiency.
Vane air compressors are the most common type. They are generally smaller and less powerful than reciprocating piston compressors, so you can use 1 of these for applications that are under 100 horsepower. The vane air compressors have low compression ratios and high capacities, but they are generally limited to low-power applications. Vane compressors tend to run hot, and they typically have a low compression ratio. It is important to choose the correct oil viscosity for your compressor.
air-compressor

Single-stage models

When comparing single-stage air compressors, look for the term “stages.” Multi-stage compressors use 2 stages and can handle more capacity and pressure. One stage involves pressurizing air using a piston and a lower-pressure cylinder. This compressed air is then moved to a storage tank. Single-stage models tend to be more energy-efficient than their two-stage counterparts. But if you don’t need a high-pressure cylinder, a single-stage air compressor can be the best choice.
Although single-stage air compressors produce less power, they can produce enough air to power pneumatic tools and other pneumatic equipment. These single-stage units are most useful for smaller-scale home projects and DIY projects. For more industrial purposes, a dual-stage model is the best choice. But if you’re in a hurry, a single-stage unit may be sufficient. Ultimately, it depends on what you plan to do with the air compressor.
Single-stage air compressors feature a single cylinder, 1 piston stroke for each revolution of pressurized air. Single-stage compressors are typically smaller and more compact, making them a good choice for smaller work environments. Their cfm capacity (cubic feet per minute) is an important indicator of operating capacity. If you plan to use multiple pneumatic tools, you will probably need a higher cfm model. Similarly, the horsepower of single-stage compressors indicates its working capacity. One horsepower moves 550 pounds per foot per minute.
Multi-stage air compressors are generally more expensive and more energy-efficient than single-stage units, but they can offer higher air flow rates. While they may be more complex, they can lower general operating expenses. If you plan on using your air compressor for industrial or commercial use, a dual-stage model might be the best choice. However, if you’re planning to use the air compressor for mass production, a single-stage model may be the best choice.
Single-stage air compressors have the same piston size and number of inlets, while dual-stage models have a smaller first piston and a much longer second piston. Both have a cooling tube in between the 2 pistons to reduce the air temperature before the second round of compression. The single-stage model is typically small and portable, while the double-stage air compressor is stationary. These compressors can both be stationary and large.

Low-noise models

Despite its name, low-noise models of air compressors are not all the same. The noise level of a compressor can be affected by several factors, including the power source and proximity to the machine. Reciprocal compressors are generally louder than electric ones because of their many moving parts. By contrast, rotary-screw and scroll compressors have fewer moving parts and are quieter.
The noise level of a gas-powered air compressor can be extremely high, making it unsuitable for use indoors. To combat this problem, you can choose an electric model. The noise level of a compressor is primarily caused by motor friction. The cover of a piston is also a major factor in noise, as pistons with minimal covers will produce a lot of noise. Previously, oil was required for a quiet compressor. However, this has changed thanks to the medical industry’s demand for oil-free models.
The CZPT EC28M Quiet Air Compressor is another model that features quiet operation. This air compressor makes 59dB of noise. This level is low enough to allow you to carry on normal conversations while it cycles. In addition, this compressor has an industrial oil-free pump and a 2.8 Amp direct-drive induction motor. These 2 features make it a great choice for businesses.
Low-noise models of air compressors are available for the construction industry. However, these compressors are not necessarily low-quality, which is why you should consider the noise level of your air tool before purchasing one. The specialists at CZPT can recommend the low-noise models for your particular application and space. Noise can distract people who work near the air compressor. That is why many businesses now opt for these models.
air-compressor

Oil-free models

A number of oil-free models of air compressors are available, but what makes them special? Oil-free compressors don’t contain oil, so they’re lubricated by grease instead. They’re a good choice if you’re working with a small compressor and don’t want to risk damaging it. On the other hand, oil-free models do generate significant amounts of heat, which can damage the compressor. Higher pressure can grind the compressor against itself, or even warp it.
A few words of knowledge can help you choose the best oil-free air compressor for your needs. For example, a compressor’s horsepower is a measurement of how powerful the motor is. Higher horsepower means a higher PSI or ACFM. You can also use the ACFM to compare the two. Scroll technology is a modern air compression system that uses a stationary and mobile spiral. This reduces the volume of air in the compressor by directing it to the center.
Purchasing an oil-free air compressor doesn’t have to be a daunting task, though. A good distributor can advise you on what type of oil-free air compressor is right for you. This way, you can save money and enjoy peace of mind while using your air compressor. And, of course, the best way to get a great deal on an air compressor is to speak to a distributor who is knowledgeable about the products available.
An oil-free air compressor is a great option for businesses that are sensitive to the contamination of air. For example, in the pharmaceutical and food industry, a minuscule oil could spoil a product or even damage production equipment. Oil-free air compressors generally have lower maintenance costs than oil-flooded models because there are fewer moving parts. Because of this, oilless air compressors require fewer maintenance and may still need to be replaced occasionally.
A few advantages of an oil-free air compressor over an oil-lubricated 1 include lower noise levels. Oil-free air compressors tend to be less noisy and run more quietly than oil-injected ones, but you should still carefully weigh the pros and cons before making a decision. Also, consider how much you use your air compressor before choosing a model. The pros outweigh the cons. In the end, you’ll be glad you chose an oil-free air compressor.

China supplier 40bar High Pressure Air Compressor for Pet Bottle Blowing Machine with Best Sales

China manufacturer Oil Free High Pressure Air Compressor for Pet Bottle Blowing Machine with Great quality

Product Description

Oil free high pressure air compressor for PET bottle blowing machine

Oil free high pressure air compressor for PET bottle blowing machine Description & advantage

DMG middle and high pressure oil-free compressor is a high-efficiency and energy-saving air compressor specially designed and developed for the PET bottle blowing machine.

High efficiency and save energy

Efficient and energy-efficient design,ensuring that users create higher profits with lower operating costs

Multi-stage compression, compression ratio achieves the best, the ambassador can maximize
The piston supercharge USES double acting cylinder to minimize leakage
Adopt efficient energy-saving motor
Optimize the design of airway to minimize system pressure loss
Variable frequency control or permanent magnet synchronous motor can be chosen to realize energy saving

High reliability

The high reliable designing ensure the air compressor is running continued and reliable, it greatly safeguard the steady production

The main movement adopts reasonable compression ratio,which reduces the wear and tear between the 2 sports.
The air pipe and water pipe are made of food-grade stainless steel, which guarantees the quality of the gas and extends the life of the unit
The pressurized machine at all levels and exhaust valves adopt optimized design of the air valve,small noise and long life
Adopt imported or domestic famous brand parts, long life
Piston supercharger has low speed, prolong the life of piston ring and packing
The electric control system of international brand electrical components is stable and reliable

Xihu (West Lake) Dis.nization design

Xihu (West Lake) Dis.nized design allows you to easily operate and maintain air compressor, better for production services
Integrated into pry,compact design ,easy installation

Easy to use, easy to replace, maintenance without lifting equipment
A control system has a fault diagnosis function, so that you can quickly troubleshoot fault and ensure production
A full range of safety and striking operations and warning alerts make the unit safer

Oil free high pressure air compressor for PET bottle blowing machine Detail

Oil free high pressure air compressor for PET bottle blowing machine Technical Parameters

Customer site

High pressrue air compressor Package & Shipping

FAQ

1. What makes you different with others?

1) Our Excellent Service
For a quick, no hassle quote just send email to us
We promise to reply with a price within 24 hours – sometimes even within the hour.

2).Our quick manufacturing time
For Normal orders, we will promise to produce within 15-20 working days.
We can ensure the delivery time according to the formal contract

2. Can I use our own brand logo on the products?

Yes. We provide OEM/ODM service to our customers. Our professional engineers having rich experience in heat pump design and manufacture. Just tell us your ideas or provide the drawing, we can help you to carry out your ideas.

3.What is your terms of delivery?

We accept FOB, CFR, CIF, EXW etc. You can choose the 1 which is the most convenient or cost effective for you.

4.What about warranty?

12 Months after B/L date. Any failure occurred within the period due to our responsibility, we’ll supply you the spare parts for free, also permanent technical support and consultation all life long for the machines.

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with 2 digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between 40 percent and 80 percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

China manufacturer Oil Free High Pressure Air Compressor for Pet Bottle Blowing Machine with Great quality

China Standard 10bar 55kw High Pressure Industrial Piston Air Compressor for Pet Bottle Blowing Machine with Free Design Custom

Product Description

Product Features

1. Elegant appearance, low noise, reach LEVEL 1 energy effeciency

2. Adopt CZPT own AB series low pressure air end, directly connected to the motor with low speed, high efficiency and reliability.

3. Intake system adopts high-efficiency filter with 1um filtration accuracy.

4. The centrifugal fan cooling system has a unique design style supporting the cooling of variable frequency fan and the configuration of inlet filter screen, which makes the air compressor more energy-saving, more reliable and more convenient for maintenance.

5. The gas pipeline adopts steel pipe + flexible joint, and the oil pipeline adopts O-ring + plane sealing structure design, which can effectively prevent pipeline vibration and leakage, and realize maintenance free forever.

6. Large oil-gas separation system, rotating arm structure, fully humanized design.

7.The electrical control adopts brand electrical components, equipped with CZPT IoT, supporting computer or mobile APP, which realizes remote real-time monitoring of the air compressor system, easily realizes the functions of operation data query, fault early warning, historical information storage and so on, comprehensively grasps the operation status of the air compressor system.

8. Support the company’s special centralized control system. The intelligent system can keep the air compressor in stable operation by detecting the subtle gas consumption changes of the air compressor station system to save energy.

9. Support the built-in heat recovery system to provide users with domestic hot water supply, etc.

Product Technical Description

Specification-D series
Model	Power	Pressure	Air flow	Outlet size	Weight	Dimensions
	(kW)	(bar)	(m³/min)	(inch)	(kg)	(LWH)mm
AA6-37A-D	37	8	7.9	DN50	1750	190015001600
		10	6.1
		13	5.8
AA6-45A-D	45	8	9.6	DN50	1850	190015001600
		10	9.5
		13	6.0
AA6-55A-D	55	8	12.5	DN50	2390	250016001700
		10	9.8
		13	7.7
AA6-75A-D	75	8	16.5	DN50	2430	250016001700
		10	12.3
		13	12.1
AA6-90A-D	90	8	20.1	DN80	3350	298018502571
		10	16.0
		13	12.1
AA6-110A-D	110	8	23.7	DN80	3730	298018502571
		10	18.6
		13	15.8
AA6-132A-D	132	8	28.2	DN100	4780	328018802120
		10	22.4
		13	19.5
AA6-160A-D	160	8	32.8	DN100	5571	328018802120
		10	27.3
		13	22.1
AA6-185A-D	185	8	39.1	DN100	5200	345020002150
		10	33.5
		13	28.0
AA6-200A-D	200	8	42.7	DN100	5590	345020002150
		10	37.0
		13	33.0
AA6-220A-D	220	8	47.8	DN125	6700	400021502250
		10	41.6
		13	36.4
AA6-250A-D	250	8	54.3	DN125	7650	400021502250
		10	47.4
		13	41.1
AA6-280A-D	280	8	57.3	DN125	7900	400021502250
		10	52.3
		13	46.6
AA6-315A-D	315	8	64.4	DN125	8500	450021502250
		10	56.7
		13	51.6
AA6-355A-D	355	8	72.7	DN125	9000	450021502250
		10	63.7
		13	55.9

FAQ

1 What trade terms do we provide? What kind of settlement currency do we offer?

Trade term :CIF ,CFR ,FOB,Ex-Works
As far Our business traded in Dollars ,Euros and RMB .

2 How long is our delivery?

Our standard delivery time is 30-40 days after confirmation order & receiving recipets for standard compressors, for the other non standard requirement will be discussed case by case.

3 What is the voltage of the compressor?

The available voltage include 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the same time we provide other voltage according to customer requirement.

4 Can our compressor run in high temperature environment? What is the working temperature range for our machine?

Yes ,our machine would run in high temperature environment ,until now our products have been sold to many countries which would meet high temperature in summer ,such like Iraq, Saudi Arabia, Egypt, Algeria, etc.
Work temperature range :1-45 ºC(33.8ºF-113ºF)

5 What’s the min. Order requirement ?

Min. Order requirement is 1PCS.

Contact us

Company Name: ZheJiang CZPT Precise Machinery Co., Ltd.

If you are interested in any of our products,please feel free to contact us.We are looking forward to cooperating,growing and developing with your sincerely.

Choosing an Air Compressor

Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
air-compressor

Positive displacement

There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses 2 lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other 1 to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.

Oil-injected

Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these 2 air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
air-compressor

Oil-free

When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in 1 minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.

Single-stage

A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses 2 valves – 1 for inlet and 1 for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is 1 that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
air-compressor

Low-noise

A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase 1 with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise 1 is an excellent choice.

China Standard 10bar 55kw High Pressure Industrial Piston Air Compressor for Pet Bottle Blowing Machine with Free Design Custom

China Professional 50HP 37kw 4.6 – 6.6 M3/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me factory

Product Description

TECHNICAL DATA

Model Parameter		DL-10VSD	DL-15VSD	DL-20VSD	DL-25VSD	DL-30VSD	DL-40VSD	DL-50VSD	DL-60VSD	DL-75VSD	DL-100VSD
Air flow m3/min Pressure Mpa		1.2/0.7	1.65/0.7	2.5/0.7	3.2/0.7	3.8/0.7	5.3/0.7	6.8/0.7	7.4/0.7	10/0.7	13.4/0.7
		1.1/0.8	1.5/0.8	2.3/0.8	3.0/0.8	3.6/0.8	5.0/0.8	6.2/0.8	7.0/0.8	9.6/0.8	12.6/0.8
		0.95/1.0	1.3/1.0	2.1/1.0	2.7/1.0	3.2/1.0	4.5/1.0	5.6/1.0	6.2/1.0	8.5/1.0	11.2/1.0
		0.8/1.2	1.1/1.2	1.9/1.2	2.4/1.2	2.7/1.2	4.0/1.2	5.0/1.2	5.6/1.2	7.6/1.2	10.0/1.2
Lubricant L		10	18					30		65
Noise		66+_2	68+_2						72+-2
Driving way		Coaxial Direct Coupling
Power Supply		380V/50Hz
Power HP		10	15	20	25	30	40	50	60	75	100
Starting way		VSD
Dimension	L mm	900	1080		1380			1500		1800
	W mm	670	750		850			1000		1250
	H mm	845	1015		1175			1335		1670
Weight KG		220	300		480			500		1200
Outlet pipe diameter		G1/2	G3/4		G1			G1-1/2		G2

Model Parameter		DL-125VSD	DL-150VSD	DL-175VSD	DL-200VSD
Air flow m3/min Pressure Mpa		16.2/0.7	21.0/0.7	24.5/0.7	28.7/0.7
		15.0/0.8	19.8/0.8	23.2/0.8	27.6/0.8
		13.8/1.0	17.4/1.0	20.5/1.0	24.6/1.0
		12.3/1.2	14.8/1.2	17.4/1.2	21.5/1.2
Lubricant L		72	90		110
Noise		72+_2		75+_2
Driving way		Coaxial Direct Coupling
Power Supply		380V/50Hz
Power HP		125	150	175	200
Starting way		VSD
Dimension	L mm	1800	2300		2500
	W mm	1250	1470		1470
	H mm	1670	1840		1840
Weight KG		1200	2000		2200
Outlet pipe diameter		G2	G2-1/2

INSIDE STRUCTURE AND COMPONENT

SINGLE STAGE AIR END

SKF bearing
Big Rotor,large bearing,low speed
High precision,high efficiency,long service life

Professional Customized Inverter

It can monitor various parameters of the motor including the temperature of the motor so as to reduce the risk of high temperature of the motor;

Independent air duct design, strong environmental adaptability;

Fast response, response time less than 50ms;

High and low frequency torque which can output 180% rated torque.

Permanet Magnet Motor

The permanent magnet motor cooling structure design F class insulation

No bearing design-100% transmission eficiency

Perfet inear output torque, low speed retains high torque output

For up to 5 years of durabliy experiment,40000 hours of durable rouble-fee operation

Intelligent Touch Control Panel

Real-time observation of the compressor running condition:ar end,fan, exhaust temperature, exhaust pressure and power ouput, the total power consumption, faut messages,24-hour customer service

Xihu (West Lake) Dis.function design: data curve,parameter seting, equipment information and data query functions.

Historical data record,faut record and output report,equipment using information management.

Realize the function of the timing switchgear to avoid the waste due to human negligence

FACTORY

After Sales Service

• Warranty: One year for the whole machine 2 year for air end , and spare parts will be provided with best price.
• Over board engineer service is available for most countries.

Special Customized Service
• Quantity: MOQ 5 pcs Logo customized.

FAQ

The Air Compressor Is a Versatile Tool

The Air Compressor is 1 of the most versatile tools in any garage or workshop. It is easy to use and can perform a variety of tasks, from jackhammering to drilling. These machines are available in a wide variety of sizes and types, making it an excellent choice for a variety of situations. With a single motor, you no longer need separate motors for each tool. Its lightweight, compact design makes it easy to handle, and the single motor also reduces wear on parts.
air-compressor

Oil-injected

Oil-injected air compressors require a large amount of lubricant, which needs to be added to the sump regularly to maintain optimum performance. As there are many types of industrial fluids, a well-intentioned maintenance technician may add the wrong lubricant to the compressor. If this happens, the compressor will become incompatible with the lubricant, resulting in excessive carryover and the need to flush and replace downstream air treatment components.
Typically, the G 110-250 oil-injected rotary screw compressor from Atlas Copco provides reliable compressed air, preventing costly downtime. The G110-250 oil-injected rotary screw compressor is highly reliable and durable, enabling it to function in temperatures up to 46degC/115degF. Despite the oil-injected air compressor’s robust design, this unit requires very little on-site installation, and it features simple operation.
The primary advantage of oil-injected air compressors is the reduced cost of running. The cost of oil-free compressors is less than half of that of oil-injected ones, and it will require fewer maintenance costs in the long run. Moreover, the oil-free system is more environmentally friendly than oil-injected air compressors. But the drawbacks of oil-injected air compressors are substantial, too. It can contaminate finished goods and cause a significant financial risk for the manufacturer.
An oil-injected rotary screw air compressor offers several advantages over its counterpart. First, it features an innovative vertical design with variable-speed drive, allowing it to run more efficiently. Second, oil-injected air compressors reduce energy consumption by up to 50% compared to non-oil-injected air compressors. They also have a thermostatic valve, allowing them to maintain an optimum temperature. Thermostatically-regulated oil coolers allow the compressor to run more quietly.

Oil-free

What is an oil-free air compressor? The name refers to a type of air compressor that does not contain oil in the compressor chamber. Oil-free air compressors still use oil for various purposes, including lubricating the moving parts and managing waste heat. However, many people do not realize that their air compressor still requires oil for proper functioning. This article will explore why this type of air compressor is preferable for many users.
First of all, oil-free air technology has many benefits. For one, it reduces the energy cost involved in filtering air, and it minimizes leaks. Moreover, it also reduces the oil costs associated with compressor refills. And finally, it reduces the risks of contamination. Oil-free air technology is the future of compressed air. If you’re looking for an oil-free air compressor, here’s what to look for in your search.
Depending on the purpose of your air compressor, it may be beneficial to invest in an oil-free air compressor. Oil-lubricated air compressors are generally more durable than their oil-free counterparts, but they may cost twice as much. You should still consider the cost of ownership before purchasing an oil-free compressor. The oil-free models can be easier to transport, and they are more powerful. Moreover, they’re quieter than oil-lubed models.
An oil-free air compressor also means less maintenance, as it doesn’t need oil to work. This type of air compressors also features fewer moving parts, which means fewer places for problems to develop. All oil-free air compressors are manufactured to meet ISO Class 0 and 1 air purity standards. They also have less noise and vibration compared to their oil-based counterparts. So, why not choose an oil-free air compressor for your business?
air-compressor

Gasoline

When choosing a gas-powered air compressor, it’s important to consider the advantages of gasoline. This energy source can power a large air compressor without electricity. However, this type of air compressor lacks electrical hookup, so you’ll need to run an extension cord if you need to use it at a distance. However, gas compressors are able to function with just a gas tank. This makes them ideal for medium to heavy-duty industrial applications.
Another important consideration when choosing a gas air compressor is its size. Larger compressors are typically larger than portable ones and require more space. This makes them easier to transport and operate on the go. However, if you’re not sure which type of air compressor is best for you, consider the gas-powered versions. While they may be lighter, they don’t run as smoothly as their electric counterparts. Gasoline-powered compressors are not as portable as their electric counterparts and require proper maintenance.

Electricity

Electricity in an air compressor is not cheap. A 25 HP air compressor runs for 10 hours each day, 5 days a week. The motor in these machines consumes 746 watts per hour. To find out how much electricity the equipment uses, multiply the wattage by the running time. For example, if the compressor runs for 3 hours, then it will use 1.9 kilowatt hours of electricity. To determine how much electricity an air compressor uses per day, you can calculate the kilowatt hours and multiply the number by the utility rate. Considering this, you can determine the cost of running your air compressor once per month.
The cost of operating an air compressor depends on the type of compressor. Electric air compressors are often silent and can run without any maintenance. These tools can be left unattended for up to 4 thousand hours before requiring repair. Electric air compressors require higher power for higher pressure, so you should plan accordingly. Whether or not you need a maintenance visit is up to you, but the benefit of not having to spend a fortune on repairs is priceless.
Although compressed air is not an energy-efficient source, its use in a variety of applications may save you money and kilowatts. Since an air compressor uses power when it is running, the cost is lower than the cost of operating a power tool. If you plan to use your air compressor for a long time, make sure that it is maintained properly. Proper care will save you money and power, and you may even be able to get an extended warranty if the compressor breaks down.
air-compressor

Variable frequency drive

The main purpose of a variable frequency drive (VFD) in an air compressor is to reduce energy consumption in the process of compression. A single motor drag system cannot adjust its speed continuously according to the weight of the load. By applying frequency control to the compressor, the power consumption can be reduced while maintaining the same pressure level. Therefore, a VFD is an excellent choice for compressors. Its benefits are numerous.
A VFD can also monitor the temperature of the motor and send error signals if the motor is running too hot or too cold. This eliminates the need for a separate sensor to monitor the oil pressure. These functions are useful not only in lowering energy consumption, but also in improving the performance of an application. Moreover, a VFD can monitor additional variables such as temperature and motor speed. Hence, it is a useful investment.
When using a VFD, it is crucial to choose the right motor. The speed of the compressor should be within the maximum starting limit of the motor. The air tank may be of any size, but a constant pressure limit is required to keep the VFD running within the service factor of the motor. In addition to a VFD, a master controller should also include a remote pressure set point and a PID card for a master controller. The transmitter should incorporate all useful data from the VFD, including the speed and the oil temperature. The VFD must be tested before it is integrated with the master control. It should be tested for min and max speed, temperature, and current within the expected range.
The use of a VFD in an air compressor has many benefits. One of the most notable is the reduction in power consumption. Fixed-speed compressors run on set points of 6 to 7 bar. An extra bar of compression uses 7 percent of energy. This energy is wasted. A VFD-powered air compressor can also increase the life span of compressor parts. It is 1 of the best investments in your compressor. So, why wait any longer?

China Professional 50HP 37kw 4.6 - 6.6 M3/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me factory

China Custom 50HP 37kw 4.6 – 6.6 M3\/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me supplier

Product Description

Xihu (West Lake) Dis.ang after-sales service

1.24/7 after-sales service support in English languages.

2. Follow up the feedback of products in 2months intervals by email or call.

3. Guidance of installation and commissioning on-site can be provided by factory-trained technicians or local Authorized Service Center.

4. Technical training for customers in Xihu (West Lake) Dis.ang air compressor factory or working site.

5. Plenty of original spare parts with proven quality are all available from our central stocks in ZheJiang and all distributor depots.

6. All kinds of technical documents in different languages.

RFQ

1. Why do customers choose us?
Xihu (West Lake) Dis.ang compressor with 37years old history, we are specialized in Rotary Screw Air Compressor. Germany Standard and 15years of exporting experience help us win more than 50 loyal foreign agents. We warmly welcome your small trial order for quality or market test.

2. Are you a manufacturer or trading company?
We are a professional manufacturer with a big modern factory in HangZhou, China, with a professional design team. Both OEM & ODM services can be accepted.

3. Where is your factory located? How can I visit there?
Our factory is located in HangZhou City, ZheJiang Province, China.

4. What’s your delivery time?
380V 50HZ we can deliver the goods within 15days. Other electricity or another color we will delivery within 20-25days, if urgently order, pls contact our sales in advance.

5. How long is your air compressor warranty?
One year for the whole machine and 2 years for screw air end, except consumable spare parts and we can provide some spare parts of the machines.

6. How does your factory do regarding quality control?
Quality is everything. we always attach great importance to quality control from the very beginning to the very end. Our factory has gained ISO9

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with 2 pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the 2 types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last 9 to 18 months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for 2 to 5 diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with 2 pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose 1 with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

$China Custom 50HP 37kw 4.6 - 6.6 M3\/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me supplier$ $China Custom 50HP 37kw 4.6 - 6.6 M3\/Min Direct Driven Screw Air Compressor for Pet Bottle Blowing Machine near me supplier$

China OEM 30 Bar High Pressure Air Compressor for Pet Bottle Blowing Machine with Great quality

Product Description

Product Description

Model: DHH2030

Free air delivery: 2 m3/min

Working pressure: 30bar

Screw air end rotor lobe: 5:6

Control: PLC

Driven: belt

Cooling: by air

Electric motor: 30hp 22KW 380v/50hz/3ph IP54 grade

Discharge temperature: less than ambient +8 ºC

Noise: less than 65 dB(A)

Air outlet size: G3/4″

Dimension:2200*1600*1970mm

Weight: 1460kg

Warranty: 24 months for the screw air end,12 months for the whole set compressor.

The air compressor specially designed for medium-pressure laser cutting is an integrated armored equipment developed by CZPT compressor for the sheet metal and laser industries. The system is equipped with 1~3m3/min@30bar/40bar compressed air, air tank 130L -1000L (optional), stainless steel plate for CZPT dryer, lower pressure dew point, 5-stage precision filter, centralized electronic sewage, thereby ensuring the cleanness of the cutting gas source.

Technical Parameters

Model	Exhaust pressure(Mpa)	Volume flow (m3 / min)	Power(kW)	Outlet diameter	Dimension(mm)	Weight(kg)
DHH1030	3	1.0	11	G3/4″	165015001970	1230
DHH1230	3	1.2	15	G3/4″	165015001970	1300
DHH1630	3	1.6	18.5	G3/4″	220016001970	1400
DHH2030	3	2.0	22	G3/4″	220016001970	1460
DHH2530	3	2.5	25	G3/4″	220016001970	1530
DHH2040	4	2.0	25	G3/4″	220016001970	1530
2-DHH3030	3	3.0	37	G1″	240029001970	1750

1. High compression efficiency. The process of compressing gas by a piston compressor is a closed system, and its compression efficiency is high.
2. A wide range of applicable pressures. Piston compressors can be designed for medium pressure, high pressure, and ultra high pressure, and at constant speeds, when the exhaust pressure fluctuates, the displacement of the piston compressor remains basically unchanged.

Advatages

1. Valve materials are made of Sweden stainless steel band.
2. In order to ensure that air compressor highly reliable, using a redundant design principles, setting multiple protection measures: unloading, down drain, exhaust, ensure that the zero-pressure start.
3. Timed drain valve: Drainage and drainage at a time interval can be adjusted. Ensure that the captain of an air compressor runs comtinuously between regular drainage, effectively preventing water too much liquid strike accidents.
4. Low exhaust temperature(10.0MPa exhaust air temperature ≤ 170 degrees, the temperature of exhaust air is above ambient temperature of 15-20 ºC from after – cooler).
5. Fuel consumption per hour less than 0.143/KW.
6. High reliability and long maintenance period, very low fuel consumption, low energy consumption and so on, greatly reducing the overall general operating costs.

Air end

The compression efficiency of piston compressor is high,and the process of gas compression of piston compressor belongs to closed system, and its compression efficiency is high. the adaptability of piston compressor is strong,and the exhaust volume of piston compressor is wide.

Control Panel

Real-time observation of the compressor operation status:Host, fans, exhaust gas temperature, exhaust pressure,power output, total electricityconsumption, fault messages, 24-hour customer service line.

Multifunction Design: Data curve, parameter settings,device information, data query.

Freeze dryer

Choose the refrigerated dryer designed with aluminum alloy three-in-1 plate heat exchanger, no pollution, high efficiency, high purity; universal choice, simple and reliable design, stable performance, no icing phenomenon, easy to install.

Air Tank

The gas storage tank can store a certain amount of gas, and the output air pressure is relatively stable, at the same time, it can reduce the temperature in the gas path and remove some water, dust and impurities. The gas storage tank adopts high quality material as raw material, uses advanced welding technology to work, and passes ISO9001 certification.

Application industry

Especially suitable for: water and electricity, PET bottle blowing, leak detection, military and other fields

Project Case

About us

Dehaha Compressor was founded in 1996 with over 150 skilled employees and more than 25 R&D engineersteams ‘ . We focus on the research & develop,manufacture and energy-saving solutions of screw air compressor to create value for customers and society.In 2018 our total sales volume approached 15 million US dollars.By over 23 years enhanced experiences of designing,producing and marketing,today our valued customers are over 130 countries.Germany Standard and 13 years exporting experience help us won more than 50 loyal overseas agents.

Dehaha’s primary businesses focus in following key areas:
Oil-injected rotary screw compressors
Portable screw air compressors
Oil free air compressors
High pressure air compressors
Air treatment equipment

At Dehaha,we earn our customers’ trust and satisfaction by manufacturing the superior quality compressed air
products for all industries.All of our products are designed for reliable performance,easy maintenance,and maximum energy efficiency.We have sales representatives who can speak English,Spanish,French,and Russian which makes it easier for our clients from all over the world to interact and negotiate with us.

Dehaha continuously innovates product development and management to meet customers’ demand.The powerful enterprise culture and continuous innovation make CZPT improved rapidly to reach the business principle”Energy Saving First, Mutual Value Shared”. CZPT mission is to be a world-renowned high-end brand,with sustainable development,constantly improving its own value and sharing it with our customers and staff.Committed to offer our customers a silent and energy-saving manufactured products.

Why choose us
Our Services

After-sale Service
• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.
• Warranty: One year for the whole machine Genuine spare parts will be provided with the best price.
• An overboard engineer service is available.

Overseas Engineer Service
• We are available to send our engineer for aboard service. Only need you to arrange accommodation, transportation, and translator. The extra cost for each will be discussed based on the local price level.

Special Customized Service

(1) Full OEM
• Quantity: at least 5 pcs
• In this plan, we will do all the changes (Color, nameplate, and logo) as your need, and will not charge extra fee.
(2) Half OEM
• Quantity: no limit
• Under this program, we can make the necessary alteration (nameplate and logo) but we will charge some extra fee for the nameplate, as the nameplate factory has the MOQ.
(3) Logo OEM
• Quantity: no limit
• Only the logo will be changed to yours, and no extra fee will be charged.

FAQ

1.Why customer choose us?
DHH COMPRESSOR ZheJiang CO.,LTD.with 24 years old history,we are specialized in Rotary Screw Air Compressor.Germany Standard and 13 years exporting experience help us won more than 30 loyal foreign agents.We warmly welcome your small trial order for quality or market test.

2.Are you a manufacturer or trading company?
We are professional manufacturer with big modern factory in HangZhou,China,with professional design team.Both OEM & ODM service can be accepted.

3.Where is your factory located? How can I visit there?
Our factory is located in HangZhou City, ZheJiang Province, China. We can pick up you from ZheJiang , it’s about 1 hour from ZheJiang Xihu (West Lake) Dis. Airport to our factory. Warmly welcome to visit us!

4.What’s your delivery time?
380V 50HZ we can delivery the goods within 14 days. Other electricity or other color we will delivery within 22 days,if urgently order,pls contact our sales in advance.

5.How long is your air compressor warranty?
One year for the whole machine and 2 years for screw air end, except consumable spare parts and we can provide some spare parts of the machines.

6.How does your factory do regarding quality control?
Quality is everything. we always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained ISO9001:2015 authentication and CE certificate.

7.How long could your air compressor be used?
Generally, more than 10 years.

8. What’s payment term?
T/T,L/C,D/P,Western Union,Paypal,Credit Card,and etc.Also we could accept USD, RMB, Euro and other currency.

9.How about your customer service?
24 hours on-line service available.48 hours problem solved promise.

10.How about your after-sales service?
(1) Provide customers with installation and commissioning online instructions.
(2) Well-trained engineers available to overseas service.
(3) Worldwide agents and after service available.

The Air Compressor Is a Versatile Tool

Oil-injected

Oil-free

Gasoline

Electricity

Variable frequency drive

China OEM 30 Bar High Pressure Air Compressor for Pet Bottle Blowing Machine with Great quality

China Good quality 380V Screw Compressor 30 Kw 185 Cfm Air Compressor for Pet Bottle Blowing Machine with high quality

Product Description

TECHNICAL DATA

Model Parameter		DL-10	DL-15	DL-20	DL-25	DL-30	DL-40	DL-50	DL-60	DL-75	DL-100
Air flow m3/min Pressure Mpa		1.2/0.7	1.65/0.7	2.5/0.7	3.2/0.7	3.8/0.7	5.3/0.7	6.8/0.7	7.4/0.7	10/0.7	13.4/0.7
		1.1/0.8	1.5/0.8	2.3/0.8	3.0/0.8	3.6/0.8	5.0/0.8	6.2/0.8	7.0/0.8	9.6/0.8	12.6/0.8
		0.95/1.0	1.3/1.0	2.1/1.0	2.7/1.0	3.2/1.0	4.5/1.0	5.6/1.0	6.2/1.0	8.5/1.0	11.2/1.0
		0.8/1.2	1.1/1.2	1.9/1.2	2.4/1.2	2.7/1.2	4.0/1.2	5.0/1.2	5.6/1.2	7.6/1.2	10.0/1.2
Lubricant L		10	18					30		65
Noise		66±2	68±2						72±2
Driving way		Direct Driven
Power Supply		380V/50Hz
Power HP		10	15	20	25	30	40	50	60	75	100
Starting way		Y DELTA
Dimension	L mm	900	1080		1380			1500		1700
	W mm	670	750		850			1000		1200
	H mm	845	1015		1175			1335		1630
Weight KG		220	380		500			700		1200
Outlet pipe diameter		G1/2	G3/4		G1			G1-1/2		G2

Model Parameter		DL-125	DL-150	DL-175	DL-200	DL-250	DL-300	DL-350	DL-430	DL-480	DL-540
Air flow m3/min Pressure Mpa		16.2/0.7	21.0/0.7	24.5/0.7	28.7/0.7	32/0.7	36/0.7	42/0.7	51/0.7	64.0/0.7	71.2/0.7
		15.0/0.8	19.8/0.8	23.2/0.8	27.6/0.8	30.4/0.8	34.3/0.8	40.5/0.8	50.2/0.8	61.0/0.8	68.1/0.8
		13.8/1.0	17.4/1.0	20.5/1.0	24.6/1.0	27.4/1.0	30.2/1.0	38.2/1.0	44.5/1.0	56.5/1.0	62.8/1.0
		12.3/1.2	14.8/1.2	17.4/1.2	21.5/1.2	24.8/1.2	27.7/1.2	34.5/1.2	39.5/1.2	49/1.2	52.2/1.2
Lubricant L		72	90		110		125	150			180
Noise		72±2		75±2			82±2			84±2
Driving way		Direct Driven
Power Supply		380V/50Hz
Power HP		125	150	175	200	250	300	350	430	480	540
Starting way		Y DELTA
Dimension	L mm	1700	2300		2500	3150
	W mm	1200	1470		1470	1980
	H mm	1630	1840		1840	2150
Weight KG		1200	2000		2200	3500	4000	4500	6000	6500	7200
Outlet pipe diameter		G2	G2-1/2			DN85				DN100

INSIDE STRUCTURE AND COMPONENT

SINGLE STAGE AIR END

SKF bearing
Big Rotor,large bearing,low speed
High precision,high efficiency,long service life

Permanet Magnet Motor

The permanent magnet motor cooling structure design F class insulation

No bearing design-100% transmission eficiency

Perfet inear output torque, low speed retains high torque output

For up to 5 years of durabliy experiment,40000 hours of durable rouble-fee operation

FACTORY

After Sales Service

• Warranty: One year for the whole machine 2 year for air end , and spare parts will be provided with best price.
• Over board engineer service is available for most countries.

Special Customized Service
• Quantity: MOQ 5 pcs Logo customized.

FAQ

What to Look For When Buying an Air Compressor

An air compressor is a very useful tool that can help you complete many different types of construction jobs. This handy machine makes many tasks much easier, but not all of them are created equally. Understanding what to look for when buying an air compressor will help you make an informed decision. Here are some of the things you should look for. These include price, size, and energy efficiency. Also, make sure to consider the air compressor’s type.
air-compressor

Single-stage air compressors are quieter

When it comes to noise level, single-stage air compressors are the way to go. These machines have fewer moving parts and are quieter than two-stage models. Single-stage air compressors use an axial flow design and can be quieter than their dual-stage counterparts. Single-stage air compressors can run longer and at lower pressures. Single-stage air compressors can be used for light industrial applications. They have a long life expectancy, with some models lasting for over 3 thousand hours.
While some single-stage air compressors are quieter than two-stage air compressors, both models have noise-reduction features. One type features rubber parts, which are designed to dampen noise. Another feature makes a compressor quieter: its location near the job site. Some models feature rubber base plugs and rubber mats to reduce floor vibrations. In addition to using these features, single-stage compressors are easier to transport.
Noise levels are important when choosing an air compressor. Some machines are too noisy for comfortable work, and some businesses don’t want to expose customers to noise-generating air compressors. Other noise levels can even endanger workers’ health. Single-stage air compressors are more affordable than dual-stage compressors. They are also quieter and more powerful. But be prepared for the noise. Some single-stage air compressors are still noisy.
Compared to their two-stage counterparts, single-stage compressors are quieter when running at full capacity. However, double-stage compressors are quieter on low capacities than single-stage units. Those with variable speed are quietest at lower capacities. The difference is about 10db. If you’re concerned about the noise level, you should consider a two-stage air compressor. But if you have a small workshop, it may not be suitable for you.
One-stage air compressors are generally more efficient than two-stage air compressors. The noise from a two-stage air compressor is lower because there’s no intermediate stage. Single-stage air compressors also use a piston that rotates in a single stage, while dual-stage air compressors, also known as duplex models, are more efficient. A single-stage air compressor is quieter, but double-stage compressors are louder.
air-compressor

Two-stage air compressors are more energy efficient

Two-stage air compressors are more energy-efficient than single-stage machines. The efficiency of two-stage air compressors is increased through a combination of improved efficiency and increased longevity. These machines can store more air and have higher compression ratios. One model of a two-stage compressor can hold approximately 83 cubic feet of air at 100 PSI and 120 cubic feet at 150 PSI. A two-stage compressor is also quieter.
Two-stage air compressors are more energy-efficient because they have 2 pistons instead of one. These air compressors achieve a higher pressure rating and recover more quickly. This type of compressor is perfect for jobs that require high air pressure for a prolonged period of time. In addition, they can operate multiple tools simultaneously. This makes them better for commercial and industrial use. Listed below are some benefits of two-stage air compressors.
Single-stage air compressors can power tools in the garage or kitchen, but they are not as reliable for industrial applications. Single-stage compressors have larger parts that tend to experience condensation. Furthermore, single-stage compressors do not last long in continuous use and are less energy-efficient than two-stage ones. Whether you’re using the compressor for a single tradesperson, a small crew, or a large construction crew, two-stage compressors are the best choice.
Single-stage air compressors are often used in small-scale food preparation and production. Single-stage air compressors are easy to transport between locations, and can be plugged into several electrical outlets. Single-stage compressors are also ideal for high-volume food processing. A dual-stage air compressor is ideal for industrial use. In some cases, you can even move the single-stage air compressor between two-stage air compressors.
Single-stage compressors often cycle too quickly, drawing more electricity than two-stage units. A variable speed unit stays on a low speed for hours at a time. Single-stage air conditioners force you to lower your thermostat settings while single-stage air conditioners run too often. Both units are energy-efficient but they are not as energy-efficient as variable-speed compressors. The main difference is that single-stage air conditioners tend to drain the power source quicker.

Piston-driven air compressors are quieter

A piston-driven air compressor is 1 of the quietest types of air compressors. It is less noisy than reciprocating air compressors. A piston-driven air compressor can reach 62 decibels, while a scroll compressor is around half that volume. The 2 main components of a scroll air compressor are the piston and the helical screw. These air compressors are both very efficient and quiet.
Older compressors are incredibly noisy. They produce a “wumpa” noise similar to a large engine. They are also capable of producing a high-pitched whine. These noises can be deafening, especially in a small workshop. That’s why it’s essential to look for a quiet compressor. But what makes a compressor quiet? Read on to learn more about this essential tool.
Another difference between piston-driven air compressors and electric-driven air compressors is the power source. Electric air compressors produce less noise than gas-powered compressors, which use an engine. Piston-driven air compressors are also more efficient. They also generate less heat, making them an ideal choice for offices and other settings where noise is a problem. The best way to decide between the 2 types of air compressors is to check the manufacturer’s warranty and read the ‘Description’.
Noise reduction is the first priority of a compressor’s owner, so make sure that you have the right model. If you’re working on something sensitive, don’t place the compressor too close to a building where people might be nearby. Noise can be very disruptive to the workspace and can cause health problems. To help combat noise, you’ll need to buy a quiet air compressor. And don’t forget to consider its location: Piston-driven air compressors are quieter than their reciprocating counterparts.
Piston-driven air compressors are quiet because the piston is made of thin metal and more rubber, which absorbs the sound. Unlike reciprocating air compressors, piston-driven air compressors are more efficient than their dual-piston cousins, which are quieter and more powerful. So which type is right for you? Take a look at some of the main differences between the two. If you want a quiet compressor, make sure it meets the specifications required by the job you’re working on.
air-compressor

Oil-lubricated air compressors are more cost-effective

There are several reasons why oil-lubricated air compressors are more expensive than dry-type air compressors. First of all, oil-lubricated air compressors tend to be more reliable and quiet. Additionally, oil-lubricated air compressors require fewer parts and can last longer than dry-type air compressors. These are just a few of the many benefits of using oil-lubricated air compressors.
Oil-free air compressors have some disadvantages. They are less durable and may not be as efficient as oil-lubricated models. Additionally, because oil-lubricated air compressors use oil, they can get very noisy. While they are less expensive, they are not the best option for heavy-duty work. However, modern oil-free air compressors have soundproofing and are suitable for industrial use.
When purchasing an oil-lubricated air compressor, make sure to choose 1 with a tank capacity that meets your needs and your space. Larger tanks can be more expensive than small tanks, but larger units are easier to move around. Also, be sure to consider the weight and size of the portable air compressors when making your choice. If the weight is too large, you may have trouble carrying it from place to place.
Another benefit of using oil-lubricated air compressors is their reduced need for oil. These models can last up to a decade longer than oil-free counterparts. Oil-free air compressors are more affordable and can achieve the same high performance as their oil-lubricated counterparts. Many industrial applications benefit from these air compressors. So, which 1 is right for you? We’ve listed a few of them below.
Another benefit of choosing an oil-lubricated air compressor is the reduced cost of maintenance. This type is more durable than its oil-lubricated counterparts, which require regular oil changes to keep them running smoothly. However, it is not feasible to transport an oil-lubricated compressor, which means that you must install it permanently to keep it working efficiently. In addition, these air compressors are difficult to move and are not portable, which can limit your ability to use it in a pinch.

China Good quality 380V Screw Compressor 30 Kw 185 Cfm Air Compressor for Pet Bottle Blowing Machine with high quality