Item Description
Solution Description
Product Specialized Description
| Model : | Energy Saving Series (EPM) |
| Variety: | Oil Injected Long lasting Magnetic Screw Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Specifications |
| Operating Pressure: | seven~13bar |
| Installed Motor Power: | fifteen~110 Kw |
| Color: | Blue |
| Driven Method: | Taper Connection Direct Driven |
| Air Stop: | Original Ally-win Air End from Germany. |
| Trademark: | SCR |
| Transportation Deal: | Common Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | ZheJiang , China |
| software: | Casting,Metallic,Plastic,Rubber |
Merchandise Features
one. China-Japan latest engineering cooperation, higher dependability.
2. Oil Cooling Long lasting Magnetic Motor.
3. IP65 defense quality & weighty responsibility air filter, suitable for higher dusty surroundings.
four. IE4 Efficiency motor performance.
5.Max.RPM 1500,reduced noise,high efficiency,better existence-span.
six. Most strength conserving method, Only operate at loading.
7. Extensive frequency assortment 30%-100%.
eight. Premium Magnetic material resist far more than 180ºC temp.
nine. Trustworthy PM motor provider from Italy.
10. Direct Taper relationship, no transmission electricity loss, easy upkeep.
eleven.Touch Display screen PLC with preset managing schedule, more smart handle.
twelve. Specific VSD engineering management.
thirteen. Easy for set up and service.
14. Great Strength Saving, conserve up to more than 30-40%.
Specially created PM motor:
The PM motor performance is even greater than IE3 quality efficiency motors. The motor uses high efficiency magnetic supplies offering a lot of rewards this sort of as bearing totally free procedure, grease cost-free routine maintenance, immediate 1:1 coupling without having transmission losses, lower sound and lower vibration top to a compact framework.
Improved Vitality Financial savings:
When need is lower the PM minimal pressure compressor first of all lowers the speed to preserve the correct stream demand. If the air need stops the compressor enters standby manner, preserving additional energy. The compressor immediately restarts and runs when the pressure drops below its setpoint.
The newest era smart touchscreen controller:
SCR’s most current touchscreen interface allows simple intelligent handle for your compressor. Force and scheduling times can be effortlessly programmed allowing you to instantly commence and cease the compressor to match creation times. Distant procedure and real time monitoring are created in the controller as normal.
| Design | SCR90EPM-seven | SCR90EPM-8 | SCR90EPM-ten | |
| Capacity/Stress(m3/min,/BAR) | twelve.7/7 | twelve.5/eight | twelve.3/10 | |
| PM Motor | Energy(KW) | 63KW(90H.P) | ||
| Velocity(r/min) | 1500 | |||
| Starting way | VSD Startup | |||
| Volt(V) | 380/four hundred/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(four hundred,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Direct Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | 1~3 ppm | |||
| Outlet Connection | Rc 2 | |||
| Dimension | Duration(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Peak(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
Solution Classes
Rewards
Software
About SCR
FAQ
one What trade phrases do we give? What kind of settlement currency do we supply?
Trade expression :CIF ,CFR ,FOB,Ex-Performs As much Our organization traded in Pounds ,Euros and RMB .
2 How long is our shipping?
Our regular delivery time is 30-40 times right after confirmation purchase & getting recipets for common compressors, for the other non normal requirement will be talked about scenario by situation.
three What is the voltage of the compressor?
The accessible voltage consist of 380V/50HZ/3Phase, 400V/50HZ/3P, 415V/50HZ/3P, 220V/60HZ/3P, 380V/60HZ/3P, 440V/60HZ/3P. At the identical time we provide other voltage in accordance to customer prerequisite.
four Can our compressor run in higher temperature atmosphere? What is the working temperature selection for our machine?
Of course ,our device would run in substantial temperature atmosphere ,until now our goods have been marketed to numerous countries which wouldmeet high temperature in summer ,this kind of like Iraq, Saudi Arabia, Egypt, Algeria, and so forth. Function temperature selection :1-forty five ºC(33.8ºF-113ºF)
five What is actually the min. Order necessity ?
Min. Buy need is 1PCS.
|
US $20,000-150,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Help Check |
|---|---|
| Warranty: | Two Years |
| Lubrication Style: | Oil-free |
| Cooling System: | Oil Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
###
| Samples: |
US$ 30000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model : | Energy Saving Series (EPM) |
| Type: | Oil Injected Permanent Magnetic Screw Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~13bar |
| Installed Motor Power: | 15~110 Kw |
| Color: | Blue |
| Driven Method: | Taper Connection Direct Driven |
| Air End: | Original Ally-win Air End from Germany. |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting,Metal,Plastic,Rubber |
###
| Model | SCR90EPM-7 | SCR90EPM-8 | SCR90EPM-10 | |
| Capacity/Pressure(m3/min,/BAR) | 12.7/7 | 12.5/8 | 12.3/10 | |
| PM Motor | Power(KW) | 63KW(90H.P) | ||
| Speed(r/min) | 1500 | |||
| Starting way | VSD Startup | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Direct Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | 1~3 ppm | |||
| Outlet Connection | Rc 2 | |||
| Dimension | Length(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Height(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
|
US $20,000-150,000 / Piece | |
1 Piece (Min. Order) |
###
| After-sales Service: | Help Check |
|---|---|
| Warranty: | Two Years |
| Lubrication Style: | Oil-free |
| Cooling System: | Oil Cooling |
| Power Source: | AC Power |
| Cylinder Position: | Horizontal |
###
| Samples: |
US$ 30000/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model : | Energy Saving Series (EPM) |
| Type: | Oil Injected Permanent Magnetic Screw Compressor |
| Voltage: | 380V/50HZ/3P, 220V/60HZ/3P, 400V/50HZ/3P, 415V/50HZ/3P or Customer′s Requirements |
| Working Pressure: | 7~13bar |
| Installed Motor Power: | 15~110 Kw |
| Color: | Blue |
| Driven Method: | Taper Connection Direct Driven |
| Air End: | Original Ally-win Air End from Germany. |
| Trademark: | SCR |
| Transport Package: | Standard Wooden Packing |
| Available Certificate: | CE, ISO, UL, ASME, GHOST |
| Origin: | Shanghai, China |
| application: | Casting,Metal,Plastic,Rubber |
###
| Model | SCR90EPM-7 | SCR90EPM-8 | SCR90EPM-10 | |
| Capacity/Pressure(m3/min,/BAR) | 12.7/7 | 12.5/8 | 12.3/10 | |
| PM Motor | Power(KW) | 63KW(90H.P) | ||
| Speed(r/min) | 1500 | |||
| Starting way | VSD Startup | |||
| Volt(V) | 380/400/415(220) | |||
| Motor safety grade | IP54 | |||
| Motor isolation grade | F | |||
| Electrical Supply | 380(400,415)V/50Hz/3Phase, 220V/60HZ/3P | |||
| Outlet Temperature(ºC) | ≤ Environment Temperature+10ºC | |||
| Driven way | Direct Driven | |||
| Noise level at 1 meter | 76±3dB(A) | |||
| Cooling method | Air cooling | |||
| Oil content | 1~3 ppm | |||
| Outlet Connection | Rc 2 | |||
| Dimension | Length(mm) | 2300 | ||
| Width(mm) | 1350 | |||
| Height(mm) | 1500 | |||
| Weight(KG) | 1800 | |||
Choosing an Air Compressor
Considering a new Air Compressor? Here are some tips to make the decision easier. Learn the pros and cons of each type, including the differences between oil-injected and oil-free models, single stage and positive displacement. In addition, learn more about the different technologies that are available for your air compressor. It is important to choose an appropriate unit for the type of work you do. Here are some of the best compressors available today.
Positive displacement
There are several different types of air compressors, but most are positive displacement air compressors. They use a rotary or reciprocating component to compress air. The reciprocating component compresses air by reducing the volume of the chamber. Positive displacement compressors are used in bicycle pumps, chemical plants, and refrigerators. Positive displacement air compressors use multiple inlet ports. Despite the various types, the principle of operation remains the same.
Another type of positive displacement air compressor is a reciprocating piston. The piston inside a cylinder moves up and down, causing the compressed air to fill the upper part of the cylinder. These air compressors are used in a variety of different applications, including blowing bottles and gas pipelines. These air compressors can be water-cooled, lubricated, or non-lubricated. Different types have different capacities and air pressures.
A positive displacement flowmeter uses a rotating chamber that divides continuous fluid into discrete portions. The number of times the chamber is filled and discharged can be used to estimate the flow rate. The rotation speed of the measuring chamber is directly proportional to the flow rate. The drawbacks of this type of positive displacement flowmeter are that it is prone to jamming. If the fluid contains particles, it may be too thick for the meter to determine flow rate.
A negative displacement air compressor was invented in 1860 and is the oldest type of compressor. It uses two lobes positioned in a circular cavity. One rotor is connected to an engine, while the other pushes the other one to spin in the opposite direction. Negative displacement compressors are low-maintenance, but they do require more precision. They are often used in nuclear power plants because they use the kinetic energy of the rotating elements to produce pressure.
Oil-injected
Oil-flooded or oil-injected air compressors use liquid to seal and lubricate moving parts and reduce noise. Oil-flooded air compressors are effective for a variety of pneumatic tools and accessories. Some models have a thermostat that controls the amount of oil used during operation. Other types of oil-flooded air compressors are piston-type models. Here is an overview of the basic differences between these two air compressors.
An oil-injected air compressor is more expensive than a comparable oil-free air compressor, but its advantages far outweigh its disadvantages. An oil-free compressor is quieter, requires less maintenance, and has a lower price tag. It also offers a greater degree of air purity. A number of other advantages may also make this type of air compressor the better choice for many industrial settings. If you need a high-pressure compressor in a tight space, consider the benefits of an oil-free system.
Oil-injected air compressors require more maintenance than oil-free models. Both types of air compressors offer similar capacity and ISO 8573-1 Class 0 and 1-2 purity, but the oil-injected systems require more air-treatment components. They require an activated carbon filter and coalescing filter. Oil-injected air compressors will likely remain the standard for industrial air compressors for many years. And since their performance and efficiency are comparable, it may be worthwhile to invest in some point-of-use air treatment.
Both types of air compressors have their benefits. However, choosing between oil-free and oil-injected air compressors is not as straightforward as you might think. Whichever type you choose, make sure it will meet your needs. The benefits of an oil-injected air compressor outweigh their disadvantages. In general, oil-injected air compressors are more durable and can last longer than oil-free models. The only downside is their higher price.
Oil-free
When choosing an air compressor for your company, you’ll need to determine what it is going to be used for. For example, if you’re planning on using it to power multiple workers, you should consider getting an oil-free compressor. An oil-free compressor, on the other hand, is quieter and can power several workers at a time. If you’re a contractor, the most important consideration will be the type of jobs you’ll be doing. Higher air pressure means greater demand for air flow, and more pressure can damage the equipment.
Oil-free compressed air is certified 100% free of contaminants. Technically, oil-free air is not completely free of foreign matter, but it is extremely low within the limits of practical air quality. A technically oil-free air compressor might have a total oil level of 0.003 mg/m3. If you’re in need of a technically oil-free air compressor, you must install an air treatment equipment after your current compressor.
If you’re in the manufacturing industry, a good oil-free air compressor will save you money and reduce your environmental impact. Many of these tools require air compressors to work, and this equipment will ensure that they don’t get contaminated. To buy the best oil-free compressor, you should learn a bit about the different terms used by compressor repair companies. ACFM, for example, is the amount of air that can be compressed in one minute at rated conditions.
When you’re using an oil-free air compressor, you should know that the overall life of the device will be much shorter. Compared to an oil-flooded rotary screw air compressor, an oil-free compressor typically has a lifespan of 50 thousand hours. But it’s important to understand that this type of compressor can still cause damage to piping and processes. Therefore, you should choose an oil-free compressor when you need to clean air for your business.
Single-stage
A single-stage air compressor, also known as a piston air compressor, compresses air only once before storing it in a cylinder. This stored air has enough energy to power a variety of pneumatic tools, such as screwdrivers, chisels, and wrenches. These units are also ideally suited for low-flow applications and are widely used in gas stations, auto shops, and various manufacturing plants.
A single-stage air compressor uses two valves – one for inlet and one for outlet – to transfer compressed air. Both valves are actuated by springs. The inlet valve has a slight curvature to provide protection from damage. The compressor’s outlet valve opens when the pressure in the cylinder is higher than the pressure in the storage tank. The piston moves very quickly inside the cylinder, exerting a high amount of force throughout the compression process. This high piston speed is a common cause of compressor wear and tear.
A single-stage air compressor is ideal for smaller tradesmen and small construction crews. Its lightweight and compact design make it easier to transport and store. While it may be tempting to buy the first cheap air compressor you see, it’s important to balance the price against performance to choose the right air compressor for your needs. The best single-stage air compressor is one that provides excellent performance and durability. Its two-stage counterpart is designed for larger construction teams and large applications.
The main difference between a single-stage and a two-stage air compressor lies in their capacity. A single-stage air compressor compresses air only once and delivers it into the storage tank, while a two-stage compressor compresses it twice, creating double the pressure. Because of this, single-stage air compressors are cheaper and versatile than their counterparts, which means that they can be used for multiple purposes.
Low-noise
A low-noise air compressor is a type of industrial compressor that is less noisy than regular air compressors. These are generally smaller machines designed for smaller factories and workshops with a few to several employees. They are designed to handle mid-weight volumes of compressed air per day. This type of compressor is especially useful for smaller manufacturing businesses that need to produce compressed air for medical applications. Small breweries can also benefit from the low-noise capabilities of these compressors.
Low-noise air compressors come in various sizes and features. For smaller jobs, you can purchase a one-gallon model that is lightweight and portable. For larger jobs, you can purchase one with a larger tank that can provide more pressure for longer jobs. However, a larger tank will make the compressor heavier and harder to transport. To avoid this, make sure to check the size of the tank and how much power it can handle.
Considering a low-noise air compressor for your business? If so, you’ve come to the right place. There are a variety of affordable and dependable low-noise options to choose from. A CAT 10020C, for example, is designed to provide high-volume air to many outlets at once. A CAT 10020C comes with a 10-gallon tank, wheels, and a carrying handle.
Noise levels can also affect the productivity of employees. When employees work with air compressors in close proximity to each other, they may develop tinnitus. If employees are free from tinnitus because of the loud noise, they are likely to work more efficiently. Moreover, it will be easier for them to focus and communicate efficiently. If you need a compressor, a low-noise one is an excellent choice.
editor by czh 2023-01-24