China wholesaler Dental Low Noise Oil Free Piston Air Compressor 50L Portable Pump Air Compressor air compressor CHINAMFG freight

Product Description

Product Description

 

Oil-Free Air Compressor

This MA-103 Oil-free air compressor is compressor air
1. Usage operation announcements
1. While using should will get empty to press the machine put on the neat ground, choosing possibly well ventilated good, the dust is small, small position in degree of humidity, in order to spread hot good, sprit source cleanness dry.
2. The usage checks to get empty to press before the machine spirit road has on to the stop, the each a just like is often the phenomenon empress, putting the power cable plug to AC outlet top( the A C outlet must connect the ground is good)that meet the request, getting empty to press the machine electrical engineering to start starting namely, the electromagnetism valve acts, closing to line up the air road, whole machine begins to work.
3 The manometer instructions the pressure goes up the tallest pressure of the enactment, the pressure controller breaks to open automatically, getting empty to press the machine Stop the work.

4 Connect the row spirit valve mouth to a lowest electric voltage for using spirit source equipments tube road, opening CHINAMFG up spirit valve valve door can immediately starting providing to equipments spirit, being manometer instructioning pressure declining to the enactment dint, the pressure control shuts to match automatically, getting empty to press the machine to start afresh(the different from allest pressure value according to model number in value in lowest pressure all have set up before product a factory good, general circumstance bottom the customer do not want to adjust the initial value without authorization.
5 If the customer power supply electric voltage is low, did not attain the standard electric voltage value, can’t be strong to exercise to use, will damage to get empty to press the machine electrical engineering otherwise should another add the power supply the steady pressing the machine or adjust to press the machine, make an electric voltage for using attain the standard power supply electric voltage value.

6 Use in the process, get empty to press the machine save to will condense a little amount humidity in spirit bottle, so want to periodically drain, a the sort drains every week, before draining turn off first the power supply, open to line up the spirit valve a row do to save spirit bottle air, then turn to open to save the spirit a bottom fill to block up, after drining, turn the using then afresh.
7 Use the process inside, because having the dust in the air, so enter the spirit do away with the orotund machine request to wash every week, before washing turn off first the power supply, will away with orotund machine turn the bottom, then turn the bottom cleans with the clear water, rebind the good using then. (also can rep; Ace the new sea cotton)

2. Maintain with support
1. For insuring the safety, compressor work the hour strictlies forbid to touch on board any a piece.
2. This machine is for having no oil compressor, strictlying forbid to encourage the lubrication.
3. The environment temperature of this machine usage is 5° C~40°
4. Wash absoluteness can’t to whole on board sprinkle water the application to softly the cloth wipe the clean and the above dust, being careful to knock and break a piece.
5. Use to please cut off the power switch after completing.

4. SPECIFICATIONS
Supply Voltage: 220 V 50 Hz
Power: 545 W
Volume Flow Rate: 70 L/min
Start-up Pressure: 0.5 MPa
Capacity Discharge: 0.8 MPa
Air Container Volume: 32 L
Noise: 56~65 dB

Our Services
1.For all your inquires about us, we will reply you in  detail within  24 hours.
2.We own professional team with professional attitude to recommend products and 
services  for you.
3.The  products  have 1 year free warranty,  after which they  can still be 
provided after-sales service.
4. We offer OEM services. And we can print your own logo on the product.
5. We have well-experienced engineers, who can help you better use our products.
Your satisfaction is our duty! It will be our great honor to serve you. We do hope 
we can offer you more help in medical field and build the long term business 
relationship with you.

FAQ
Q: How to buy your products ?
A: We have some products in stock , you can take away the products after you 
arrange the payment ; If we don’t have the products in stock you want, we will 
start  production once getting the payment.
 
Q: What’s the warranty for the products ?
A: The free warranty is 1 year from the date of commissioning qualified.
 
Q: Can we visit your factory ?
A: Of course, welcome to visit our factory if you come to China.
 
Q: How long is the validity of quotation ?
A: Generally, our price is valid within 1 month from the date of quotation. The 
price will be adjusted appropriately as the price fluctuation of raw material in 
the market.
 
Q: What’s the production date after we confirm the order ?
A: This depends on the quantity. Normally, for the mass production, we need about 
one week to finish the production.

Packaging & Shipping
Packaging:Standard export corrugated paper board cartons or wooden box
Pallet: Plastic/ Wooden pallet
Shipping:By sea/ By air/ By courier (DHL, FEDEX, UPS, TNT)

Certification: CE
Type: Dental Drill & Accessories
Capacity Discharge: 0.8 Mpa
Supply Voltage: 220 V 50 Hz
After Sale Service: Free Spare Parts
Warranty Time: 12 Months
Customization:
Available

|

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

What is the energy efficiency of modern air compressors?

The energy efficiency of modern air compressors has significantly improved due to advancements in technology and design. Here’s an in-depth look at the energy efficiency features and factors that contribute to the efficiency of modern air compressors:

Variable Speed Drive (VSD) Technology:

Many modern air compressors utilize Variable Speed Drive (VSD) technology, also known as Variable Frequency Drive (VFD). This technology allows the compressor motor to adjust its speed according to the compressed air demand. By matching the motor speed to the required airflow, VSD compressors can avoid excessive energy consumption during periods of low demand, resulting in significant energy savings compared to fixed-speed compressors.

Air Leakage Reduction:

Air leakage is a common issue in compressed air systems and can lead to substantial energy waste. Modern air compressors often feature improved sealing and advanced control systems to minimize air leaks. By reducing air leakage, the compressor can maintain optimal pressure levels more efficiently, resulting in energy savings.

Efficient Motor Design:

The motor of an air compressor plays a crucial role in its energy efficiency. Modern compressors incorporate high-efficiency electric motors that meet or exceed established energy efficiency standards. These motors are designed to minimize energy losses and operate more efficiently, reducing overall power consumption.

Optimized Control Systems:

Advanced control systems are integrated into modern air compressors to optimize their performance and energy consumption. These control systems monitor various parameters, such as air pressure, temperature, and airflow, and adjust compressor operation accordingly. By precisely controlling the compressor’s output to match the demand, these systems ensure efficient and energy-saving operation.

Air Storage and Distribution:

Efficient air storage and distribution systems are essential for minimizing energy losses in compressed air systems. Modern air compressors often include properly sized and insulated air storage tanks and well-designed piping systems that reduce pressure drops and minimize heat transfer. These measures help to maintain a consistent and efficient supply of compressed air throughout the system, reducing energy waste.

Energy Management and Monitoring:

Some modern air compressors feature energy management and monitoring systems that provide real-time data on energy consumption and performance. These systems allow operators to identify energy inefficiencies, optimize compressor settings, and implement energy-saving practices.

It’s important to note that the energy efficiency of an air compressor also depends on factors such as the specific model, size, and application. Manufacturers often provide energy efficiency ratings or specifications for their compressors, which can help in comparing different models and selecting the most efficient option for a particular application.

Overall, modern air compressors incorporate various energy-saving technologies and design elements to enhance their efficiency. Investing in an energy-efficient air compressor not only reduces operational costs but also contributes to sustainability efforts by minimizing energy consumption and reducing carbon emissions.

air compressor

How is air pressure measured in air compressors?

Air pressure in air compressors is typically measured using one of two common units: pounds per square inch (PSI) or bar. Here’s a brief explanation of how air pressure is measured in air compressors:

1. Pounds per Square Inch (PSI): PSI is the most widely used unit of pressure measurement in air compressors, especially in North America. It represents the force exerted by one pound of force over an area of one square inch. Air pressure gauges on air compressors often display pressure readings in PSI, allowing users to monitor and adjust the pressure accordingly.

2. Bar: Bar is another unit of pressure commonly used in air compressors, particularly in Europe and many other parts of the world. It is a metric unit of pressure equal to 100,000 pascals (Pa). Air compressors may have pressure gauges that display readings in bar, providing an alternative measurement option for users in those regions.

To measure air pressure in an air compressor, a pressure gauge is typically installed on the compressor’s outlet or receiver tank. The gauge is designed to measure the force exerted by the compressed air and display the reading in the specified unit, such as PSI or bar.

It’s important to note that the air pressure indicated on the gauge represents the pressure at a specific point in the air compressor system, typically at the outlet or tank. The actual pressure experienced at the point of use may vary due to factors such as pressure drop in the air lines or restrictions caused by fittings and tools.

When using an air compressor, it is essential to set the pressure to the appropriate level required for the specific application. Different tools and equipment have different pressure requirements, and exceeding the recommended pressure can lead to damage or unsafe operation. Most air compressors allow users to adjust the pressure output using a pressure regulator or similar control mechanism.

Regular monitoring of the air pressure in an air compressor is crucial to ensure optimal performance, efficiency, and safe operation. By understanding the units of measurement and using pressure gauges appropriately, users can maintain the desired air pressure levels in their air compressor systems.

China wholesaler Dental Low Noise Oil Free Piston Air Compressor 50L Portable Pump Air Compressor   air compressor CHINAMFG freightChina wholesaler Dental Low Noise Oil Free Piston Air Compressor 50L Portable Pump Air Compressor   air compressor CHINAMFG freight
editor by CX 2023-10-11